what holes do i fill in on my firewall
 

what holes do i fill in on my firewall?

http://i37.photobucket.com/albums/e5...d/DSCI2309.jpg
http://i37.photobucket.com/albums/e5...d/DSCI2313.jpg

Re: what holes do i fill in on my firewall
 

What are your plans are you going back with stock wiring harness, standard transmission, or emergency brake?

Re: what holes do i fill in on my firewall
 

the ones you aren't going to use !!!!!

Re: what holes do i fill in on my firewall
 

its going in a 1971 so im replacing the drivers side of the firewall to deal with the relocating of the wiring harness and the e brake it is an auto. but all factory

Re: what holes do i fill in on my firewall
 

I filled in everything except, brake booster and steering column. I did a engine/trans swap so I knew my gas petal cable was going to be in a different location. Im also rewiring the whole truck with a new harness. I mounted the fuse box up high on the drivers side kick panel and ran the wires down through the vent in the kic panel. I wanted a real clean look with very little wires showing so its takening a little longer to get it done.

Re: what holes do i fill in on my firewall
 

thank you this is really healpful!

Re: what holes do i fill in on my firewall
 

Here is a pict of mine when it was being done. You need to know what are you going to run thru the firewall before you start which is what we did.