DJM Flip brackets
 

used DJM flip brackets to fit 73-87 1/2 tons, they could use some paint
$40 plus shipping SOLD
Attachment 651108

Attachment 651109

Re: DJM Flip brackets
 

offers?
I can powder coat or paint them if that would help....

Re: DJM Flip brackets
 

Is it just these or does it come with the u bolts and lowering shock mounts ? how much shipping to windsor ontario canada ? how much more if they were powdercoated ?

Re: DJM Flip brackets
 

These flip brackets are all I have.
you can use front shocks on the rear with no extensions.
these were on my truck before I got it.
I'm not sure on shipping to Canada...
who should i use?

Re: DJM Flip brackets
 

how about $40 shipped to the lower 48?
anyone?

Re: DJM Flip brackets
 

joe, what are they for?
(flip brakets)

Re: DJM Flip brackets
 

Jon,
On the trucks with leaf springs. You use these to put the axle on top of the spring to lower the truck. The hole for the spring bolt/axle locator is off set so
It moves the axle back so you don't have to change the length of the driveshaft.
It's a bolt in deal. To use these you also need shock extensions or you can run front shocks on the rear with no mods.
Posted via Mobile Device

Re: DJM Flip brackets
 

Do i have to be a supporting member to buy?

Re: DJM Flip brackets
 

No sir,
Only to sell or post a wanted to buy
Posted via Mobile Device

Re: DJM Flip brackets
 

Would you take $25 shipped to Cheyenne, WY? If so, I'll take them. PM sent also

Re: DJM Flip brackets
 

I believe i am first in line

Re: DJM Flip brackets
 

I'll give Jon the first opportunity, If he is interested.
then C low,
then badchevy (I'm holding firm at $40 at this time)

Re: DJM Flip brackets
 

Sorry bud, just making an offer in case it makes it down to me.

Re: DJM Flip brackets
 

Nothing from Jon,
C low are you interested?
Posted via Mobile Device

Re: DJM Flip brackets
 

I will have to pass my buddy with paypal flaked out and i dont have an account

Re: DJM Flip brackets
 

You can send me a money order.
Posted via Mobile Device

Re: DJM Flip brackets
 

give me a day.. if I dont reply I wont need em..

Re: DJM Flip brackets
 

Will do.
Posted via Mobile Device

Re: DJM Flip brackets
 

TTT
Posted via Mobile Device

Re: DJM Flip brackets
 

Still interested in them. Are you still firm on the price? If not, what's the lowest you'll go? Let me know and we'll go from there. Thanks.

Re: DJM Flip brackets
 

Sorry bud but I'm not interested in these anymore. Good luck with the sale.

Re: DJM Flip brackets
 

Ok
Thanks
Sorry I didn't see your earlier post.

$35 shipped in the lower 48
Posted via Mobile Device

Re: DJM Flip brackets
 

if you can give instructions on the installation and if you can use stock u-bolts and all hardware im very interested

Re: DJM Flip brackets
 

unbolt your u bolts, put the leaf spring under the axle or axle over top of the leaf, put the brackets under the spring perch on the axle, and put the centering pin on thew leafs in the holes on these, the holes faces forward if I remember right, put the plate under the leaf and u bolts on top of the axle down into the plate, putthe nuts back on and torque to spec. I would not use stock u bolts they are not really supposed to be reused they could be weak or stretched or anything. Any parts store should have them.

Re: DJM Flip brackets
 

Are these still available?