![]() |
what did you get done standard time edition 11/7/2010
I didnt get a chance to do anything relted to the chevy this week but i accomplished alot with the ranger. She got a new motor mount trans mount had the rear leafs re arced added a leaf and new spring bushings plus i swapped in the ashtray assembly into it so now i have a place to put the cigar in lol
last night i went to a birthday party for an old friend and had some nice cake and chicken wings lol Im trying to get the ambition to get the chevy project going again I hope everyone set their clocks right if their state participates in the time change and i sure hope everyone tested their smoke and co 2 detectors and changed batteries cause i sure dont want to hear that anyone got hurt of killed for such a simple thing to do How about you all? |
Re: what did you get done standard time edition 11/7/2010
got my frame final coated with POR15, got the axle coated, hoping to weld the trailing arm reinforcements tonight and after I get the shipping grease/antirust off all my brake components and spindles I'll be shooting them with paint, have days off til Tuesday so I'm hoping to get alot accomplished, may tear the motor and tranny apart as well
|
Re: what did you get done standard time edition 11/7/2010
Looked at the trucks and just shook my head. :lol: Getting ready to remove the window a.c. units from the house and store them away upstairs in the garage.
|
Re: what did you get done standard time edition 11/7/2010
Over the past couple months I've been collecting parts for my next truck project. Yesterday I finally scored a major piece of the project, the actual truck. LOL.
Been looking for a 48-53 Chevy and picked up a '50 Chevy that will be turned into a Rat Rod style truck resting on an S-10 chassis. The truck is totally disassembled, needs a hood and a rear fender. The stock chassis is junk, someone tried to graft a late model Caprice clip and had no earthly idea what they were doing. But! The deal included every patch panel needed for cab rust repair, new glass, new glass rubber, new cab rubber, boxes of parts, and a clean title all for $500.00! Pictures........ http://s430.photobucket.com/albums/q.../1950%20Chevy/ I brought home a truck load of stuff last night the rest will be brought home next weekend. This one is going to be a blast not having to worry about body and paint work. LOL. Other than the rust repair of course. |
Re: what did you get done standard time edition 11/7/2010
Havent looked at my truck for awhile, I forgot it was still in the garage.. I need to get out there and get the front suspension apart.
|
Re: what did you get done standard time edition 11/7/2010
put the jack and washer jar back in it and changed the fuel filter
|
Re: what did you get done standard time edition 11/7/2010
all I did was wash my truck!
|
Re: what did you get done standard time edition 11/7/2010
Did a tuneup on mine, surprising how much that motivates you to do more work once it runs a lot better.
|
Re: what did you get done standard time edition 11/7/2010
I sold a truck this weekend . Only leaves way too many left. I didnt do anything else truck related.
Frank |
Re: what did you get done standard time edition 11/7/2010
Quote:
|
Re: what did you get done standard time edition 11/7/2010
1 Attachment(s)
Painted my grill trim/bowtie and threw them back on
|
Re: what did you get done standard time edition 11/7/2010
I didn't do anything truck-related. I cleaned gutters, raked and bagged leaves today. Got a different phone Saturday.
|
Re: what did you get done standard time edition 11/7/2010
Quote:
Quote:
|
Re: what did you get done standard time edition 11/7/2010
carried the truck out to the place we're gonna paint it. probably be more work cleaning up the shop than it will be painting the truck. get to spend more time with our aunt that's suffering from cancer, and that's a good thing.
|
Re: what did you get done standard time edition 11/7/2010
Rock on the freeway shattered my windshield so I got a new one and had put in the chrome trim.
|
Re: what did you get done standard time edition 11/7/2010
Quote:
Quote:
I sold it cheap so it wouldnt just sit . Frank |
Re: what did you get done standard time edition 11/7/2010
Found out my 454 needed 2 exhaust valves. Rockers had beaten the crap out of them and one was worn down a little past the top of the keepers. Engine was getting ready to drop it. Ordered 2 valves and rockers. Waiting on the parts till i can get it back together and into the truck. The one benefit of this is that I found out the 454 I was going to use and pretty much just take a chance on running right had been recently rebuilt 0.060" over. Still has the crosshatching in the cylinders.
|
Re: what did you get done standard time edition 11/7/2010
I got my new frame back to a roller
http://i147.photobucket.com/albums/r...c10/001-11.jpg http://i147.photobucket.com/albums/r...gc10/002-9.jpg |
Re: what did you get done standard time edition 11/7/2010
made some solid progress on the C5 rear disc brake conversion kit I'm creating. Got the brackets from the cutter, installed them on my spare 12bolt, mounted everything, even solved the e-brake cable situation. All thats left is to center the caliper over the rotor and install for good.
http://img600.imageshack.us/img600/9001/1106104.th.jpg clint |
Re: what did you get done standard time edition 11/7/2010
Quote:
|
Re: what did you get done standard time edition 11/7/2010
5 Attachment(s)
some welding, some machining and some wiring.
|
Re: what did you get done standard time edition 11/7/2010
Just got in from the 4th coat of VHT Caliper Paint on my new rotors, calipers, and drop spindles, not sure what CPP covers their parts in pre packaging, but marine clean, super clean, and finally brake kleen and some scrubbing the paint layed on nice.
|
Re: what did you get done standard time edition 11/7/2010
I got a 9" earlier in the week and I tore it down this weekend. I found out that it has a trac-lok differential and 31 spline axles. I will get some pics of it when I charge my battery for the camera. I plan to rebuild it with 3.89 gears and disc brakes and throw it under the truck for the time being. I can't wait.
|
Re: what did you get done standard time edition 11/7/2010
Put in a new deck from Dual...butchered the dash up something fierce, and strongly wishing I would have just found an OEM replacement.
|
Re: what did you get done standard time edition 11/7/2010
Hauled furniture from point A to point B! :D Other than that, I have ordered Monroe Reflex shocks. Should be installed next week.
|
All times are GMT -4. The time now is 07:40 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com