The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1969 - 1972 Blazers and Jimmys Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=36)
-   -   what headers for bbc 4x4 blazer (https://67-72chevytrucks.com/vboard/showthread.php?t=431287)

coggonobrien 11-17-2010 05:42 AM

what headers for bbc 4x4 blazer
 
the chevelle hooker super comp's still the recomendation? will be running a 4 inch spring lift with a 396 and 700r4.

Thanks!
David

dnandez 11-17-2010 03:38 PM

Re: what headers for bbc 4x4 blazer
 
Why the 700r4? I was running a 700r4 behind my 454 and kept on busting it. I switched over to a th400 and no problems yet. Just no overdrive.

coggonobrien 11-17-2010 04:18 PM

Re: what headers for bbc 4x4 blazer
 
for the overdrive, i was going to buy the monster unit that should handle the power. i'm just aiming for a reliable 350-400hp at the flex plate

dnandez 11-17-2010 04:27 PM

Re: what headers for bbc 4x4 blazer
 
Ok, with that much hp you will be ok with the monster. They make a decent tranny.
Got ant pics yet?

coggonobrien 11-17-2010 04:29 PM

Re: what headers for bbc 4x4 blazer
 
no pics yet, not worth showing truck is pretty much tore down, everything but brackets removed from 2wd shortbox frame. blazer that is donating its running gear is ugly but runs well :)

2many 09-08-2012 11:13 PM

Re: what headers for bbc 4x4 blazer
 
Any answer to this question? Wrestling with a 454 / BUILT 700R4 combo on stock SBC Blazer mounts that I can't find any headers to fit... Help!

AJs72K5 09-08-2012 11:21 PM

Re: what headers for bbc 4x4 blazer
 
The short answer is that there are NO direct bolt in long tube headers for a 4x4 K5 with a big block. Expect to do some cutting and/or welding to something. I have a set sitting on mine from HERE.

2many 09-09-2012 01:31 AM

Re: what headers for bbc 4x4 blazer
 
Yeah, my eyes are bleeding from reading all the posts on this subject. Not opposed to some frame trimming / modifying - just looking for the closest fit without spending $900. Thanks.

2many 10-05-2012 07:04 PM

Re: what headers for bbc 4x4 blazer
 
Just wanted to follow up. For my situation (454, 700R4, stock SBC motor mounts and crossmember moved forward a couple inches) the Thorley 304Y was as close to a perfect fit I could find. Cut a 1/2" half-moon out of the pas. side upper frame rail to clear one tube and NO modifications on the driver side (other than reversing the lower shackle bolt to better clear the collector). Supposedly a good header for this motor as well - hope to find out soon! Found on Craigslist for $90, too!


All times are GMT -4. The time now is 09:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com