![]() |
Blazer/burban rear bumper
i know i need one of the truck brackets but what one is it inner or outer?
i got the outer ones from an 84 85 gmc like mine but i think i got the wrong ones :( oh well the 5 bucks i payed for a near mint dark gray dash pad and 6.2 Diesel hood ornimate made up for it :) |
Re: Blazer/burban rear bumper
you will need the inner brackets
|
Re: Blazer/burban rear bumper
You don't need the inner. They are like 50$ each new. Just bolt it in with the outers and put the inner bolts in the bumper for show.
I did this . It is plenty strong Posted via Mobile Device |
Re: Blazer/burban rear bumper
Quote:
|
Re: Blazer/burban rear bumper
yea maby you got them wrong.
heres mine with just the outers. (its tucked in about a 1.5inchs) http://i995.photobucket.com/albums/a...9/f6cf1c8b.jpg http://i995.photobucket.com/albums/a...9/1e40a187.jpg |
Re: Blazer/burban rear bumper
Quote:
|
Re: Blazer/burban rear bumper
it should be that in. i drilled holes 1.5 inchs back from the origanl ones
|
Re: Blazer/burban rear bumper
Quote:
truck looks Great BTW |
Re: Blazer/burban rear bumper
3 Attachment(s)
you just need the outers.i ran a burb bumper for a few year's.i switched to a sport and only have outers.it's fine for look's.but,i wouldn't stand on it.the last pic is older showing the burb bumper...my 79 is just for look's.all it haul's is "a$$".:chevy:
|
Re: Blazer/burban rear bumper
Quote:
|
Re: Blazer/burban rear bumper
Quote:
|
Re: Blazer/burban rear bumper
Go back and get the brackets. Or find them off a bother truck
Posted via Mobile Device |
Re: Blazer/burban rear bumper
Quote:
|
Re: Blazer/burban rear bumper
What ever u find that has the same bumper as yours. Don't matter truck or burb or Jimmy
Posted via Mobile Device |
Re: Blazer/burban rear bumper
Quote:
|
Re: Blazer/burban rear bumper
Lol lmc has them . The outers are like 20$ each. The inners are like 50$ !!!! Each
Posted via Mobile Device |
Re: Blazer/burban rear bumper
Quote:
|
Re: Blazer/burban rear bumper
Hmm, only the outers? I may have to take a trip to the junkyard to see what I can find!
|
Re: Blazer/burban rear bumper
I love the way the tucked rear bumper looks, but if you get hit in the back by even a bicycle, it's gonna drive the bumper into the rear end of the bedsides, especially if you use only outer or inner brackets alone.
Basically whatever happens, if anything taps that bumper, its time for paint. |
Re: Blazer/burban rear bumper
Quote:
|
Re: Blazer/burban rear bumper
I'm using the inner burb brackets bolted to flat stock
|
Re: Blazer/burban rear bumper
I only have the outer brackets on mine as well, most any thing that hits it from rear will probably be higher than my bumper any way so ,,,,,,,,,,,
no differance than have'n a roll pan like I have on my '88 S10 . also all three of my trucks need paint any way so hopefully they decent insurance . |
Re: Blazer/burban rear bumper
http://i276.photobucket.com/albums/k...n/IMG_1129.jpg
other than a good clean up lol and some paint the truck i like it's look :) |
Re: Blazer/burban rear bumper
im assuming its the same for my 88 1 ton ? i was told that brackets from a blazer would fit but a suburban wont , is that right ? im needing all the brackets to fit a bumper like 3r!c84's truck
|
Re: Blazer/burban rear bumper
Blazer and burb ones both fit. Only the outer brackets from them fit. You will need to find a truck with a sport bumper to get the inners. ( good luck with that) or order new inners. Or like me only run the outer brackets.
Posted via Mobile Device |
All times are GMT -4. The time now is 08:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com