The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   IA WTB 81-87 style Hydraulic Clutch Pedal Assy (https://67-72chevytrucks.com/vboard/showthread.php?t=432106)

Dieselwrencher 11-22-2010 04:44 PM

WTB 81-87 style Hydraulic Clutch Pedal Assy
 
Hi guys, I'm looking for a hydraulic clutch pedal assembly for a 73-87 C/K or 88-91 V series truck. We need one for my brother's truck to replace the cobbled one from a 88 up that is in there now. Just let me know what you have. Thanks Ryan.

BIGCHEVYMAN 11-22-2010 08:23 PM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
if you just need the pedal assembly i have one from a 88 crew cab. i can snap you a pic tommorow. i would take $50 plus shipping

Dieselwrencher 11-22-2010 08:43 PM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
Yes, please get me a pic. I'm pretty sure I'll take it if it is a hydro pedal assembly though. Thanks Ryan.

BIGCHEVYMAN 11-22-2010 09:45 PM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
3 Attachment(s)
pictures

Dieselwrencher 11-23-2010 02:19 AM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
Let me know a total and where to send the payment please. Shipped to 50169. Thanks Ryan.

BIGCHEVYMAN 11-23-2010 05:16 PM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
i will get this thing boxed and get you a shipping quote tommorow.

BIGCHEVYMAN 11-24-2010 08:57 PM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
i don't have a box big enough for it. i got to try to find one at work.

Dieselwrencher 11-24-2010 10:18 PM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
Ok, thanks. We're not in a big hurry, just trying to round up parts for his build.

DirtyLarry 11-29-2010 09:38 PM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
I need the same thing as Dieselwrencher for my hydraulic clutch swap as well. Anybody else have an 85-87 C/K or 88-91 R/V clutch pedal or complete brake and clutch pedal assembly?

SmokeShow 04-25-2011 01:21 AM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
Bump, I'm looking for one of these setups as well. Thanks


Mitch

b454rat 04-26-2011 09:45 AM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
Jeez with all the interest maybe I should start pulling these. I eventually will need one, but still plentiful in yards where I am. Just no time to pull them....

Dieselwrencher 04-26-2011 07:21 PM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
Quote:

Originally Posted by b454rat (Post 4647109)
Jeez with all the interest maybe I should start pulling these. I eventually will need one, but still plentiful in yards where I am. Just no time to pull them....

Go ahead and pull all of them you can find! They aren't around here. we are swapping my brother's body on to a dodge frame and won't start it until after pulling season I believe. So we're not in a hurry. Thanks Ryan.

b454rat 04-26-2011 08:05 PM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
I haven't been to the junkyard in at least a month. Last time I was there I barely walked the yard, helped a buddy pull some stuff off a big block van. Also had to check that my Cummins was still there.

Going to a auction this Saturday, but I'll try to go soon.

lilpoindexter 04-26-2011 09:22 PM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
I never see hydraulic setups like this in the yards in the LA area...I'm going to modify my '78 pedal assy. for hydraulic...but then again, if I tripped over one of these, I'd use it.

CHEVYLUVR859 04-06-2013 10:05 PM

Re: WTB 81-87 style Hydraulic Clutch Pedal Assy
 
Can you modify the older style pedals to work
Posted via Mobile Device


All times are GMT -4. The time now is 01:41 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com