The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Water getting into my cab and rusting floor! (https://67-72chevytrucks.com/vboard/showthread.php?t=433610)

Mrtn15 12-01-2010 09:16 PM

Water getting into my cab and rusting floor!
 
I have no clue why this is happening.. :( I can pour water into my cowl before my windshield, and water leaks into my cab.. its about midway down between the floor, and bottom of windshield. Why is this ? Is there a seal I can buy, or is there a serious problem ? 86 Silverado 350\350 2 Wheel, SWB.:chevy:

mooseknuckles 12-01-2010 09:27 PM

Re: Water getting into my cab and rusting floor!
 
mine leaks water on the floor too...I know it's a problem with these trucks. prob a hole rusted some where.

notrailerqueens 12-01-2010 09:29 PM

Re: Water getting into my cab and rusting floor!
 
your cowl is rusted out. i have the same problem. if you pull the cowl filler piece off and look down in ther you will see that its rusted out. you can buy the replacement pannel to fix it i believe lmc offers them. its a pretty common problem.

flamingbig10 12-01-2010 09:56 PM

Re: Water getting into my cab and rusting floor!
 
mine leaked like crazy so I closed the cowl up on the cab with HVAC aluminum tape no more puddles

Mrtn15 12-02-2010 01:12 AM

Re: Water getting into my cab and rusting floor!
 
Whoa, I don't know how to take it off. and I also Don't know how to get down in there. And do you suppose JB Weld ?

uncleben78 12-02-2010 01:18 AM

Re: Water getting into my cab and rusting floor!
 
bump.

benoit454 12-02-2010 01:25 AM

Re: Water getting into my cab and rusting floor!
 
lmc has cowls now? I didn't know that. I know they got the screens and ones with bolts or clips, and then the lower cowls which is the lower firewall on the outside.

D-Day 12-02-2010 11:57 AM

Re: Water getting into my cab and rusting floor!
 
Do you have cab lights? That was the source of my leak. Some silicone around the base(s) and around the cracks and that ended it.

Altec 12-02-2010 12:19 PM

Re: Water getting into my cab and rusting floor!
 
Quote:

Originally Posted by notrailerqueens (Post 4325472)
your cowl is rusted out. i have the same problem. if you pull the cowl filler piece off and look down in ther you will see that its rusted out. you can buy the replacement pannel to fix it i believe lmc offers them. its a pretty common problem.

My first thought. Mine had leaves stuck in it and caused it to rust. I lucked out that it rusted the other way into the engine bay.

To get the cowl piece off you pull the wind shield wipers, and you'll find a few bolts holding the cowl on. After that is a plastic vent piece which also unbolts. Then you'll be able to see down in there. Clean out any gunk, and look for rust. Even if it turns out that isn't the problem, it doesn't hurt to clean it. Would have kept mine from having a new vent for the engine...

Mrtn15 12-02-2010 02:06 PM

Re: Water getting into my cab and rusting floor!
 
wow thanks guys! I got it sealed up with some Jb weld!

Mrtn15 12-02-2010 02:07 PM

Re: Water getting into my cab and rusting floor!
 
Quote:

Originally Posted by D-Day (Post 4326493)
Do you have cab lights? That was the source of my leak. Some silicone around the base(s) and around the cracks and that ended it.

I dont have Those lights, but thanks ! I siliconed inside my cowl and fixed it !

Mrtn15 12-02-2010 02:08 PM

Re: Water getting into my cab and rusting floor!
 
Quote:

Originally Posted by Altec (Post 4326519)
My first thought. Mine had leaves stuck in it and caused it to rust. I lucked out that it rusted the other way into the engine bay.

To get the cowl piece off you pull the wind shield wipers, and you'll find a few bolts holding the cowl on. After that is a plastic vent piece which also unbolts. Then you'll be able to see down in there. Clean out any gunk, and look for rust. Even if it turns out that isn't the problem, it doesn't hurt to clean it. Would have kept mine from having a new vent for the engine...

Thanks man! this helped me a lottt. !!

Captkaos 12-02-2010 06:45 PM

Re: Water getting into my cab and rusting floor!
 
Wrote this tech article for just this situation.

http://forum.73-87chevytrucks.com/sm...?topic=12521.0


All times are GMT -4. The time now is 02:04 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com