The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   74 jimmy/blazer parts (https://67-72chevytrucks.com/vboard/showthread.php?t=43383)

BLAZIN'72 03-05-2003 09:38 PM

74 jimmy/blazer parts
 
I posted this on a couple of other message boards ( sorry ), anyway 74 GMC jimmy parts no drivetrain mostly just body parts. Good hardtop,fenders,hood,tailgate,tilt column. I live in so cal about 20 min from L.A.

TROYLV 03-06-2003 09:29 AM

need parts for 73 blazer. what prices on all parts? located in las vegas. would you consider delivering?

BLAZIN'72 03-06-2003 11:57 AM

It's pretty much a complete truck minus, engine,trans,transfer case. The interior is stripped exept for door panels dash tilt column. It would take me along time to list everything, let me know what your interested in, i will price it or you can make me an offer. Delivery is possible,let me know

Tom 03-06-2003 12:44 PM

I sent you a PM on wensday, and replyd to your post in the 73-87 forum. Please tell me the fenders are still avalible??

BLAZIN'72 03-06-2003 01:43 PM

Sorry Tom, for taking so long to answer. Yes i still have the fenders. They are not perfect but there is no rust, although they are off a 4x4 and it looks like the bottom corners have been trimed (for tire clerance). And it looks as though whom ever owned it primered it with a brush and roller. I will take some pics and atempt to post them (never did this before).

Tom 03-06-2003 02:03 PM

Quote:

Originally posted by BLAZIN'72
it looks like the bottom corners have been trimed (for tire clerance). I will take some pics and atempt to post them .
hmmmm ok well if they are trimeed then I dont think they will work, but the pics will tell. Thanks.

BLAZIN'72 03-06-2003 02:06 PM

pictures
 
1 Attachment(s)
here are some pics. How do i get it to load more than one pic at a time?

alf4444 03-06-2003 03:30 PM

i want the fenders how much to a business @84116 pm could be interested in the doors also

r0lf- 03-06-2003 07:01 PM

If he doesnt take the fenders then I will DEFINITELY take the drivers side. I live in The Bay Area so shipping wouldnt be that big of a deal.

BLAZIN'72 03-06-2003 08:05 PM

I'll take $25 ea for the fenders + shipping. Alf asked first so he has first dibs. I have nevar shipped anything like this before so i could use some advice (like how to package, what courier to use).

old Rusty C10 03-06-2003 08:59 PM

if the right side inner fender( wheel well ) is not part of the fender deal i would be interested in that provided its rust free i live in the NYC metro area for shipping purposes

alf4444 03-06-2003 11:28 PM

email me your zip code and adress also size and weight packaged and my buddy will get me a quote also what is your price for the doors i might be interested in those too.
i do not need the inner fender wells
alf4444@hotmail.com

and
awolfe@myriad-proteomics.com

alf4444 03-07-2003 09:42 AM

So far the only quote i have received is through forward air and it is for 45 but you would have to take it to their terminal in Los Angelas. My buddy works with pilot air often and should have a quote to me sometime today, they are forward air's direct competitor so they should beat the price, they might even pick it up from your house.

Packaging- make your best effort to box them up (seperatly) if you are selling the doors and i like your price it will probably bebest to palletize all 4 items, wrapped in cardboard and shipped vertically with windows down. Most trucking companies will help out a little if you ask. :D

BLAZIN'72 03-07-2003 03:00 PM

1 Attachment(s)
The doors are not factory blazer doors they were cut from truck doors. I am going to post a picture.

alf4444 03-07-2003 03:18 PM

so hou bou that shipping info

1Low76jimmy 03-08-2003 05:48 AM

Hows the rust on the Rocker Panel's and everywhere else might be interested in the Whole Cab only!!!

Ryan Flowers 03-08-2003 09:00 AM

How much for the tail gate?

Will a blazer tailgate inter change with a suburban?

Thanks,

Gregsmx 03-11-2003 12:54 AM

Blazin, was this truck a 'Cheyenne' equipped trim? If so, do you have the interior rear trip particle board panels between the back seats? If so, are they in decent shape?

78SilveradoSWB 03-12-2003 05:09 PM

Do you have the under the dash courtesy light setup?

monypit 04-09-2003 11:19 PM

I really need the rear tracks out of the drivers and pass doors would you be willing to sell just those. Mine were missing when i bought it. and how is the roof?

old Rusty C10 04-10-2003 12:16 PM

still no answer on the inner fendr well????

Captkaos 04-10-2003 04:33 PM

Quote:

Originally posted by Ryan Flowers
Will a blazer tailgate inter change with a suburban?

No it won't.

BLAZIN'72 04-10-2003 06:05 PM

Blazer parts
 
First off I would like to say sorry to anyone who responded to this post and I didn't get back to them. I posted this a while ago and at the time i was not working, I have since started a new job and have been working 12-14hr. 7 days a week (I'm tring to save up to finish my 72 k5). I still have the truck and still want to get rid of the parts, but I just do not have the time to ship. So if any one lives locally or is willing to drive, the parts are for sale cheap!! The top is in good cond. i would give it a 7 it can be yours for $150, the doors are complete and can be yours for $20ea. (I would rather not part them I don't want a bigger mess)!

monypit 04-22-2003 01:28 AM

I pmd you twice but I will try posting now to see whats up I am interested in the top and doors and can be in CA on Saturday email me if this is ok and get me directions and a way to reach you on Sat. you can mail me at jcrs2001@msn.com or send me a private message. Thanks


All times are GMT -4. The time now is 03:51 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com