The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - 1984 C10 Vacuum question. (https://67-72chevytrucks.com/vboard/showthread.php?t=433896)

ndbrownknives

12-03-2010 06:00 PM

1984 C10 Vacuum question.

Hello all. I am new to the site and was reffered by my local auto part store mgr. I have an '84 LB 2WD AT 305ci. I had to redo all of the vacuum lines when I got the truck which I was able to get straight from a vac diagram, but I have two vac switches on the fire wall I can't figure out what they do. There is one vac switch on each side(passenger/driver) of the firewall. Each has a vacuum nipple on one side and two wires plugged into the other side. Does anyone know what these do and where they should attach to vacuum. Any help would be huge. Thanks to all of you.

CaliDude76

12-03-2010 08:56 PM

Re: 1984 C10 Vacuum question.

Pix would help... ;)

ndbrownknives

12-04-2010 02:53 AM

Re: 1984 C10 Vacuum question.

2 Attachment(s)

Here are pics of each. Thanks for the help.

big_b

12-04-2010 03:00 AM

Re: 1984 C10 Vacuum question.

the one on the drivers side is the vacuum switch that controls the torque converter lock up or overdrive and the one on the passenger side controls the computer.

ndbrownknives

12-05-2010 02:31 PM

Re: 1984 C10 Vacuum question.

Awesome thanks. Do you happen to know where each vacuum side(of the switches) should attach to a vacuum source?

All times are GMT -4. The time now is 12:52 PM.