The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Suspension (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=25)

- - running new brake hardlines (https://67-72chevytrucks.com/vboard/showthread.php?t=434959)

lonelywanderer

12-10-2010 02:52 AM

running new brake hardlines

i just finished my ifs swap on my 59 apache and was wondering if anyone has some suggestions on running new hardlines to my frame mounted power mastercylinder.

lolife99

12-10-2010 11:11 AM

Re: running new brake hardlines

Buy a good tubing bender and "double flare" tool.
Take your time.
Some people will map out their lines with stiff wire and then duplicate them with the tubing.
You will waste a little tubing so buy plenty.

Wild83C10

12-10-2010 10:46 PM

Re: running new brake hardlines

Don't buy the coils of tubing, you wont be able to get it straight.

Flaring the ends will need some practice.

lonelywanderer

12-11-2010 02:46 AM

Re: running new brake hardlines

thanks for the tips. what size lines would you guys suggest?

lolife99

12-11-2010 08:54 AM

Re: running new brake hardlines

3/16"
Posted via Mobile Device

All times are GMT -4. The time now is 06:08 AM.