![]() |
Neutral Safety Switch Location
Ok, hopefully I'm not loosing my mind. I can not find my Neutral saftey switch. I have a 82 chevy K10 auto tranny. I looked inside on the steering column down towards the firewall where it bolts to the firewall. There is a cut out or opening in the column where it looks to go but I don't see it anywhere. The engine will not start in gear so it acts like it has one but I can't find it. Is it located somewhere else?
|
Re: Neutral Safety Switch Location
it could also be on the ignition switch its on top of the column close to the dash
|
Re: Neutral Safety Switch Location
Anyone have a picture of this style of switch mentioned?
|
Re: Neutral Safety Switch Location
here what the switch looks like
|
Re: Neutral Safety Switch Location
Quote:
No picture attached |
Re: Neutral Safety Switch Location
1 Attachment(s)
this is what one looks like for an 84 85 86
|
Re: Neutral Safety Switch Location
Quote:
The end of the story is I wanted to get my back up lights working and couldn't find the neutral saftey switch. Everything I have seen or read indicates the back up light switch was intergrated in the neutral saftey switch. The switch I found looks just like a neutral saftey switch but only has two electrical prongs on it. It fits in my column and works great. The only thing I had to do was ziptie it in place becouse my column has clips that require it to be screwed in and this switch didn't have any moldings to fasten it down. Now I have backup lights! Thanks for pointing me towards the ignition switch becouse thats where the backup light harness was wrapped up hiding from me. |
| All times are GMT -4. The time now is 04:40 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com