3 inch drop springs
 

i got 3 inch drop springs is it ok to put 2 inch drop spindles or would the springs be to low does any one know if they got 1 inch or 1.5 drop spindles

Re: 3 inch drop springs
 

Do it up!

Re: 3 inch drop springs
 

your better off to run 2.5"-3" drop spindles, and 1"-2" lowering springs. it won't mess up the suspension geometry as much.

Re: 3 inch drop springs
 

but if i do it would it be to low for 15's i want 20's but for now 15's and what drop shocks ya recommend

Re: 3 inch drop springs
 

I had Bell Tech 3" drop spindles and stock coils with a coil and a half cut off, 15" wheels, stock shocks.

Re: 3 inch drop springs
 

I would go with 3" spindles and a 2" spring the 3" springs tends to move around, harsher ride, and alignment problems

Re: 3 inch drop springs
 

so where would be the best place to buy the kit from and how much is it when you cut a coil

Re: 3 inch drop springs
 

I buy all my lowering parts from summit they usually have the best prices and they have great customer service

Re: 3 inch drop springs
 

I got my spindles at the local auto parts, and cutting the coils is free....if you have a grinder and cut off wheel?

Re: 3 inch drop springs
 

sorry i actually ment how much drop is it when you cut a coil and what would be cheaper to buy the original springs and cut them cuz the previous owner cut them already or just buy drop ones what shocks are you all running

Re: 3 inch drop springs
 

lol....I think its about a inch per coil, it might be cheaper to buy stockers?, I don't know for sure. I never priced them or droped springs. You could always try the ones you have first and see...I just have the stock shocks on still.

Re: 3 inch drop springs
 

does any one know how much the stock coils measure so i can figure out see what drop it has right now and see what spindle i need