The 1947 - Present Chevrolet & GMC Truck Message Board Network

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - need help with summit (https://67-72chevytrucks.com/vboard/showthread.php?t=436347)

need help with summit

which drop spindles do i need to get from summit?

Re: need help with summit

Quote:

Originally Posted by 87 chevy silverado (Post 4357883)

Those look to be S-10 spindles. You'll need to know which brake option your truck has, rotor size.

Re: need help with summit

Re: need help with summit

You will have to measure the thickness of your front brake rotor. There are two options, 1" and 1.25"

check out these, and look at the notes on them http://www.summitracing.com/parts/SUM-G709/

Here are the ones I used on my suburban with the thicker rotors..http://www.summitracing.com/parts/CLP-CP4S4/

Re: need help with summit

1 1/4 in. thick rotors or 1 in. thick rotors

Re: need help with summit

could i not buy the spinels then the rotors to match the spindels cuz in need the rotor any way???

Re: need help with summit

i would go with the 3 in. cut 1 coil = 5 in Drop

Re: need help with summit

Quote:

Originally Posted by 87 chevy silverado (Post 4357921)

could i not buy the spinels then the rotors to match the spindels cuz in need the rotor any way???

you will need two bro so they mach if you can even do that ;)

Re: need help with summit

you need to know the thickness of your stock front brake rotor

Re: need help with summit

k i will look soon thanks

Re: need help with summit

Your cheapest price source for any DJM or Belltech Drop part Guaranteed!!!.

Re: need help with summit

you'll also need new calipers, brake lines, and wheel bearings if you do the rotor swap

Re: need help with summit

ok thanks looks like im measuring them before i buy i didnt know there was that big of difffrence