The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Seeing clearly? No (https://67-72chevytrucks.com/vboard/showthread.php?t=436555)

ah_5500 12-20-2010 01:15 AM

Seeing clearly? No
 
Well I think my wiper motor gave out on me recently. It does make a noise if I push it in which I believe is just the washer fluid motor. So, what's a good way to check before I buy one and where is a good place to get on cheap? Thanks for any help
Posted via Mobile Device

Sammy 12-20-2010 09:05 AM

Re: Seeing clearly? No
 
72chevytrucks.com/vboard/archive/index.php/t-413301.html[/url]
Done a search on the site here are a couple of trouble shooting ideas.

I'm not getting the link to paste. Do a SITE search at the top of page for WIPER MOTOR LOCDOC that will get you soem help

VetteVet 12-20-2010 09:54 AM

Re: Seeing clearly? No
 
Here is the link for the wiper motor it doesn't include the washer motor because the author didn't include the circuit for it. The link is in the electrical forum stickys under Electrical FAQs. it will be the first link posted.

http://rmcavoy.freeshell.org/electrical.html

ah_5500 12-20-2010 07:57 PM

Re: Seeing clearly? No
 
ok thanks for the input

1968CHEVYC10 12-20-2010 08:06 PM

Re: Seeing clearly? No
 
I could be wrong but IIRC when I re-did the wiring on my wiper motor, the washer pump was driven by a gear off of the wiper motor. So there wouldn't be a washer motor.

swamp rat 12-20-2010 09:33 PM

Re: Seeing clearly? No
 
Quote:

Originally Posted by Sammy (Post 4360851)
72chevytrucks.com/vboard/archive/index.php/t-413301.html[/url]
Done a search on the site here are a couple of trouble shooting ideas.

I'm not getting the link to paste. Do a SITE search at the top of page for WIPER MOTOR LOCDOC that will get you soem help

Attempting to fix link,dosent seem to work.

http://72chevytrucks.com/vboard/arch.../t-413301.html [/url]


All times are GMT -4. The time now is 01:10 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com