The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973-1987 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=5)
-   -   CA Parting 85 Chevy 5/8 ton 2wd Diesel (https://67-72chevytrucks.com/vboard/showthread.php?t=437228)

KrazyRay 12-24-2010 10:00 PM

Parting 85 Chevy 5/8 ton 2wd Diesel
 
5 Attachment(s)
Just in is a 85 diesel with a rod through the block, but it has a spare short block that filled up with water with all of the rain in the last month.:smoke:
Bare cab with title already sold to draggin86.:chevy: I will be using the back end for a bed trailer.

4 speed tilt column with key $125 plus shipping

Hydro boost/power steering pump $125 shipped SOLD

Brake/clutch pedal assembly, m/c, reservoir, slave, lines $75 shipped

Bell housing $40 plus shipping SOLD

New diesel starter $42 shipped SOLD

Uncut dash gauge bezel $30 plus shipping

Cab corner speakers complete $37 shipped SOLD

Aftermarket inner grille $60 plus shipping SOLD

Please respond in thread to avoid confusion. Paypal and post office MO works good. I'll give 24 hours after I answer a question on a part and then it goes to next person in line. Merry Christmas!
Thanks, Ray

KrazyRay 12-24-2010 10:04 PM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
5 Attachment(s)
222

KrazyRay 12-24-2010 10:11 PM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
5 Attachment(s)
333

KrazyRay 12-24-2010 10:14 PM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
4 Attachment(s)
444

78K20 12-24-2010 11:37 PM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Ray,

I need a working glow plug controler ( OEM ),

and,


a rust / dent free OEM passenger door. Power window & door lock?

For my 84 silverado.

SS Delux 12-25-2010 12:05 AM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
What type of transmission is in it ?

KrazyRay 12-25-2010 01:18 AM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
78K20- Don't know diesels...please point it out to me, these are manual doors

SS Delux- Its an sm465

GmtGmt 12-25-2010 07:37 AM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Selling the complete truck?

87 chevy silverado 12-25-2010 10:45 AM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
i wish i didnt commit to buying someother things for my truck or i get that grill

70BLAZERX2 12-25-2010 10:46 AM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Is it an aluminum bellhousing? It should be.

How much for bellhousing shipped to 37745

Thanks.

KrazyRay 12-25-2010 11:09 AM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Quote:

Originally Posted by GmtGmt (Post 4369139)
Selling the complete truck?

Sorry, The cab is already sold.
Thanks, Ray

KrazyRay 12-25-2010 11:11 AM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Quote:

Originally Posted by 70BLAZERX2 (Post 4369223)
Is it an aluminum bellhousing? It should be.

How much for bellhousing shipped to 37745

Thanks.

I need a few days to pull and I will get shipping quote.
Thanks, Ray SOLD

78K20 12-25-2010 01:15 PM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Quote:

Originally Posted by KrazyRay (Post 4368986)
78K20- Don't know diesels...please point it out to me, these are manual doors

SS Delux- Its an sm465

I just found out that GM changed the GP controler over
to a "new" style in 85. I guess 83-84 is where I have to
look.

I've heard that most all the reproduction controlers are
prone to premature failure, in a relative short amount of
time.

Thanks, anyway.
Merry Xmass.
Posted via Mobile Device
Posted via Mobile Device

thepenguin99 12-25-2010 02:33 PM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Do you have the brackets that hold the radiator w/rubber pads (need both top and bottom rubber pads)? I am assuming it was the larger 4 core size radiator.

GmtGmt 12-26-2010 06:39 AM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
engine bay Wiring harness with all sensors on the motor,
Injection Pump, Injectors?

KrazyRay 12-26-2010 09:39 PM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Quote:

Originally Posted by thepenguin99 (Post 4369473)
Do you have the brackets that hold the radiator w/rubber pads (need both top and bottom rubber pads)? I am assuming it was the larger 4 core size radiator.

There is only 3 pads and one upper hold down...Sorry HOLD DOWNS SOLD

KrazyRay 12-26-2010 09:42 PM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Quote:

Originally Posted by GmtGmt (Post 4370301)
engine bay Wiring harness with all sensors on the motor,
Injection Pump, Injectors?

The injector pump is $50 plus shipping. I need a few days to inspect and pull the harness.
Thanks, Ray

thepenguin99 12-26-2010 10:13 PM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Quote:

Originally Posted by KrazyRay (Post 4371314)
There is only 3 pads and one upper hold down...Sorry

What do you want want for the 3 pads and one hold down shipped to 38053? I assume the truck had the radiator that is 19" tall and roughly 3" wide tanks? I may be better off just buying them new, dunno.

KrazyRay 12-27-2010 12:24 AM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Quote:

Originally Posted by thepenguin99 (Post 4371383)
What do you want want for the 3 pads and one hold down shipped to 38053? I assume the truck had the radiator that is 19" tall and roughly 3" wide tanks? I may be better off just buying them new, dunno.

$10 shipped. If I find the 4th rubber and or 2nd hold down no extra charge...still $10 shipped.
Thanks, Ray

thepenguin99 12-27-2010 01:18 PM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Quote:

Originally Posted by KrazyRay (Post 4371617)
$10 shipped. If I find the 4th rubber and or 2nd hold down no extra charge...still $10 shipped.
Thanks, Ray

Ill take them. How do you want payment? Also, just confirming but they are from a radiator with roughly the dimensions of 19" tall and 3" or so wide tanks right? I know some trucks had shorter radiators with different hold downs and some had the thinner radiator but I am thinking a 85 diesel should be the same as I am looking for.

KrazyRay 12-27-2010 01:45 PM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Quote:

Originally Posted by thepenguin99 (Post 4372239)
Ill take them. How do you want payment? Also, just confirming but they are from a radiator with roughly the dimensions of 19" tall and 3" or so wide tanks right? I know some trucks had shorter radiators with different hold downs and some had the thinner radiator but I am thinking a 85 diesel should be the same as I am looking for.

The tank is 3" wide, the radiator is 21x41. This is the big 4 core hold down. I checked my stash and all other hold downs are smaller (3 core). pm sent

Rogue_Sentinel 12-28-2010 01:09 AM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
pm

grayw0lf 12-28-2010 01:25 PM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Do you know if the speedometer gauge worked well / didn't jump all over the place?

How much for the speedo gauge / cluster & the Injector pump together?

KrazyRay 12-30-2010 01:04 AM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
I don't know about the speedo as I bought the truck after it blew the engine. Cluster with injector pump $100 shipped. GMT is first up on the pump.
Thanks, Ray

KrazyRay 12-30-2010 10:52 AM

Re: Parting 85 Chevy 5/8 ton 2wd Diesel
 
Quote:

Originally Posted by 70BLAZERX2 (Post 4369223)
Is it an aluminum bellhousing? It should be.

How much for bellhousing shipped to 37745

Thanks.

The bell housing is $60 shipped to TN.
Thanks, Ray


All times are GMT -4. The time now is 11:27 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com