Had an opportunity to purchase a set of rims
 

Just had these drop into our hands for $850.00 for the whole set with tires. !8 X 8 on the front and 20 X 10 on the rear, with Kumho Ecsta tires. They still have plenty of tread left and the rims are only a year old.

Re: Had an opportunity to purchase a set of rims
 

Nice, now if I can only find a set to drop into my hands without dropping over 2k.

Re: Had an opportunity to purchase a set of rims
 

Veryy nice, thats a pretty good christmas present if you ask me

Re: Had an opportunity to purchase a set of rims
 

Sweet score there sir. Price is even better.

Re: Had an opportunity to purchase a set of rims
 

nice score

Re: Had an opportunity to purchase a set of rims
 

Any trouble mounting the front wheels?
Or does your truck have the 1" Light Duty rotors on it?

Re: Had an opportunity to purchase a set of rims
 

Thats a screamin deal!!!

Got another same set?!?!?:devil:

Re: Had an opportunity to purchase a set of rims
 

I would also like to know the answer to that.

Damn nice score :metal:

Re: Had an opportunity to purchase a set of rims
 

Good question. We read all of the discussions on another thread about the fitment of the rims to the hub on the front of a truck. Yes, we have the 1 1/4" front discs and yes there is a slight push on the center caps of the front wheels. When we picked up these wheels, the fronts had a 1/4" spacer behind them---I left that on the bench and put a slightly thinner spacer (5/16) on and then shaved the center cap's plastic tabs a little with my bench grinder. The caps now snap on and they seat like they should. The real problem to this whole deal is the fact that the GM center caps for the hub has a large ring around it to let the cap seat onto the hub. If that tab was gone, then there would be more than enough room for the wheel's caps.