The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Why am I leaking feul? (https://67-72chevytrucks.com/vboard/showthread.php?t=437404)

blu-by-u-2 12-26-2010 05:30 PM

Why am I leaking feul?
 
1 Attachment(s)
Hey guys. I put my old holley carb back on this weekend, the edelbrock was second hand and just was not working out. Anyway, when I start it, it runs for about 5-7 seconds then fuel starts coming out of the air horn for about 5-7 seconds then it seems to stop. Then when I shut off the engine Its like smoke or vapors or something coming out of the carb for about 10-15 seconds. Any help would be great! thanks

bowtiecb 12-26-2010 05:41 PM

Re: Why am I leaking feul?
 
sound likes its loadn up, try tapn the float bowls or adjusting the floats, might have trash in it

Tx Firefighter 12-26-2010 06:08 PM

Re: Why am I leaking feul?
 
Yes, your float is stuck open. Either the float is bad or the needle and seat need cleaning or replacing.

mooseknuckles 12-26-2010 06:21 PM

Re: Why am I leaking feul?
 
the float is stuck prob dirt in the needle and seat. you should have a fuel filter where that piece of rubber hose is. lol

blu-by-u-2 12-26-2010 06:25 PM

Re: Why am I leaking feul?
 
Quote:

Originally Posted by mooseknuckles (Post 4370974)
the float is stuck prob dirt in the needle and seat. you should have a fuel filter where that piece of rubber hose is. lol

oh there is I keep stuffing toilet paper in the rubberhose. lol!

blu-by-u-2 12-26-2010 06:32 PM

Re: Why am I leaking feul?
 
Oh yeah, also the two adjusting screws on the sides of the front floatbowl doesn't seem to change idle when adjusting them. Why is that ?

Tx Firefighter 12-26-2010 06:39 PM

Re: Why am I leaking feul?
 
You'll need to square away the flooding issue before you can judge the idle mixture adjustment screws. With excess fuel going down the venturi you're not going to get anything meaningful out of adjustments.

blu-by-u-2 12-26-2010 07:56 PM

Re: Why am I leaking feul?
 
Well imagine that! took float bowls off tht floats seemed to look fine.I did bend tab on the front float just a hair for a better shutoff though. Put back together. Started up and............. NO MORE FUEL LEAKING !!! Thanks guys. And when I shut it off no more smoke or fog or whatever that was before.


All times are GMT -4. The time now is 04:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com