The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   late model wheels on an 86 (https://67-72chevytrucks.com/vboard/showthread.php?t=438134)

The--Tank 12-31-2010 05:46 PM

late model wheels on an 86
 
1 Attachment(s)
Will these 16" wheels fit on a 86 4x4? I found a good deal on some 90's model alum 6 lug wheels with new nittos that I would love to have, mainly for the tires but would run the wheels if they would work. I know i would have to modify the front caps for the hubs but is there anything else i'm missing?

ortega 12-31-2010 08:05 PM

Re: late model wheels on an 86
 
i think they should fit if they are the same bolt pattern. i have some newer style rims on my truck, but my truck is 5 lug
http://i4.photobucket.com/albums/y13...ider/009-1.jpg

TeXaS 86 C10 12-31-2010 08:52 PM

Re: late model wheels on an 86
 
if its the same lug pattern they should match up, but you will have to get new lug nuts

463 12-31-2010 09:14 PM

Re: late model wheels on an 86
 
http://www.roadkillcustoms.com/hot-r...ALL+MODELS+4X4

Pop's C-10 12-31-2010 11:38 PM

Re: late model wheels on an 86
 
yes

MTCK 01-01-2011 04:58 AM

Re: late model wheels on an 86
 
Measure the center holes to ensure that they will fit over your hubs before you buy. I know that web page says they will fit, but I recall the newer trucks having a smaller center hole than our square bodies. Let us know if they fit.

bmchevy1979 01-01-2011 11:58 AM

Re: late model wheels on an 86
 
Quote:

Originally Posted by MTCK (Post 4381075)
Measure the center holes to ensure that they will fit over your hubs before you buy. I know that web page says they will fit, but I recall the newer trucks having a smaller center hole than our square bodies. Let us know if they fit.

that's what I thought and for the front you will have to open it through the wheel for the hub or does the center cap come off

The--Tank 01-03-2011 11:11 AM

Re: late model wheels on an 86
 
Thanks for all the imput. I will check the center hub size. that is what I was most worried about.

sailed2japan 01-03-2011 11:21 AM

Re: late model wheels on an 86
 
I'm pretty sure the offset is also different and the newer wheels have an extra inch of back spacing, I'm not 100% on this though.

The--Tank 01-03-2011 11:24 AM

Re: late model wheels on an 86
 
even if they are they should tuck in those big finders.:lol:

spudz 01-03-2011 12:24 PM

Re: late model wheels on an 86
 
I have tryed this on a 4x4. The offset is a little off so they are tucked too far in and the fronts will not go on over the hub.

The--Tank 01-03-2011 12:51 PM

Re: late model wheels on an 86
 
So your saying the wheel won't fit up to the hub because of the offset correct. That is a problem.

jkade 01-03-2011 02:52 PM

Re: late model wheels on an 86
 
The center hub hole is too small.. you would have to machine it out to make it work.

The--Tank 01-03-2011 02:54 PM

Re: late model wheels on an 86
 
Thanks that's what I was needing to know

spudz 01-03-2011 03:08 PM

Re: late model wheels on an 86
 
no I was saying the front hub will not fit threw the hole in the rim AND the offset is off. but can be corrected with spacers. I dont know what you would do about the hub fitting the hole tho.

crazyforsummer 01-04-2011 12:01 PM

Re: late model wheels on an 86
 
yes those wheels will fit on on an 80s and 70s trucks with a 6 bolt wheel pattern on the axels i have seen those era of trucks with the same wheels on them in calgary alberta when i use to live there


All times are GMT -4. The time now is 04:41 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com