![]() |
blazer parts
filler neck 40.00 obo
top hold downs 2 rear 1 front 40.00 obo hatch hinge 35.00 obo hatch supports 50.00 hinge covers 25 per pair rear seat white needs covering good foam 150.00 obo rear arm rest 40 per set have 3 0r 4 sets all white hatch is busted but can cut corner patches if needed all hatch hard ware latch handle rods etc 75.00 pass side glass scratched up a little 30.00 obo any patch panels from top can be cut only have one tailgate strip 10.00 drivers side will post mere parts asa i get it tore down more sorry for messing up my origiolal post hope this one is better thanks for looking buyer to pay all shipping http://s1180.photobucket.com/albums/...baugh/trucks2/ |
Re: blazer parts
Maaboo,
1st off, ouch that has to really suck arse, glad you were ok. What's the 1st 6" of the top look like? (Bolts to Windshield) I know the top is thrashed, I don't need the whole thing. Luv |
Re: blazer parts
all hatch hard ware latch handle rods etc 75.00
I'll take this. PM your payment info, please. |
Re: blazer parts
I'll go second in line for the hatch stuff if Mathew doesn't get them. PM me with info.
|
Re: blazer parts
How much shipping for your best pair of whit rear arm rests? Also, how much for steering column/linkage/wheel? Zip is 16335. Thanks. Brian
|
Re: blazer parts
how much for the sheetmetal around the neck? inner and outer where it screws to the inner quarter and comes through the outer. about a 1' square. thanks, glen
|
Re: blazer parts
Any emblems any good? Trans case shifter with knob? Eric
|
Re: blazer parts
I'll get in line for any of the hatch parts, if it gets to me!
|
Re: blazer parts
Maaboo! Where are you???
|
Re: blazer parts
Nevermind didnt see your original post was moved.
|
Re: blazer parts
pics of white arm rests PLEASE? glen@sauersgarage.com
|
Re: blazer parts
i would like original jack and hardware if you got them, also the wiring for the dome lights if its a singlewall top.
thanks |
Re: blazer parts
would also be interested in the two interior rear side panels if they'er in good shape
|
Re: blazer parts
I'm interested in the carpet hold downs and floor leveling pads if you have them.
|
Re: blazer parts
no carpet holddowns , pm matthew 79 will get pics and shipping quote on arm rest tomorrow t case shifter not for sale yet!!!!! may swap blazer suspension under my 70 c-10 column not for sale yet!!!!
|
Re: blazer parts
How much for best pair of rear white arm rests to 16335?
|
Re: blazer parts
is it stock front bucket seats? How much for the drivers seat tracks shipped to 37745
if they are stock only. Thanks |
Re: blazer parts
1 Attachment(s)
i need these pieces of quarter and your nicest white rear arm rests. thanks, glen
|
Re: blazer parts
the brackets and the locking clips that bolts to the top and the bed rail that locks the hatch peices if they get to me or are for sale how much and shipped to surprise az 85374 thanks.
|
Re: blazer parts
Is there a tailgate upper strip or the foreward and aft carpets strips available.
|
Re: blazer parts
Hows the Gas tank??
Thanks |
Re: blazer parts
sorry for the delay in pictures for everyone had some stuff to take care of with the kids sorry will get them out tonight
|
Re: blazer parts
arm rest
2 on left are driverside 4 on right are passenger side http://s1180.photobucket.com/albums/...gh/arm%20rest/ |
Re: blazer parts
how much for the rear brackets that holds the rear bed pannels total of 6 (brackets 3 on each side) they are mount to the inside of the bed sides. shipped to 92802.thanks
|
Re: blazer parts
I'm also interested in the filler neck. Got a pic? Can I see it?
|
All times are GMT -4. The time now is 09:29 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com