how the heck do i get my igniton out
 

ok i have 1978 chevy k10 and i need to change the igniton cylinder in it and i cant get it out, how does it come out of the steering column, i dont have the keys but the igniton is broken anyway, it still turns the truck on just no keys required lol

Re: how the heck do i get my igniton out
 

first thing you do is disconnect the battery positive cable for poops and giggles then you take off the steering wheel. You then need to take out the snap ring that holds on the ignition lock plate or whatever you call that thing right under the steering wheel. There is a special tool that you screw on the column shaft and compress the spring under that plate but a piece of stock steel and a couple of bolts can make one quick..
Once that is removed remove the arm from the turn signal stalk and the hazzard pull out. Pry up carefully the turn signal gizmo and you should either see a torx head bolt or a cllip that you take out at the top of the ignition cylinder. once that is out what is left should pop out and the install is the reverse

Re: how the heck do i get my igniton out
 

ok well i think i understand what your saying but do you have any pics of the piece that needs compressed or has a spring under it, i think i know what it looks like but the farthest iv been in my steering column is the wheel off and the horn stuff off other than that i have no idea

Re: how the heck do i get my igniton out
 

youve seen it then its the black piece under the steering wheel as soon as you pop off the steering wheel. Unfortunately i dont have any columns here to take pics of

Re: how the heck do i get my igniton out
 

ok so i have to pull that black peace out and then its easy goin from there