The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   injector placement question (https://67-72chevytrucks.com/vboard/showthread.php?t=439709)

87chevy.com 01-09-2011 07:29 PM

injector placement question
 
I couldnt think of a better title. Basically I am going to be re-doing the engine harness with some

http://www.techflex.com/images/prod_CCP_banner.jpg

and while staring at the engine, I was thinking about rotating the injectors 180* so the connector is pointing towards the intake v/s stock position of pointing outwards. I think this will make the engine harness a little cleaner. I dont think it will affect driveability b/c of the injectors are rotated, but I dont know.
Anyone here done something like this before?

clint

67C10BUB 01-09-2011 08:17 PM

Re: injector placement question
 
I thought that they only went in one way. I just had my injectors cleaned and the clips would only go on if the injector is placed that way. Maybe that's only on the 2008 and up.

blazerboy72 01-09-2011 09:15 PM

Re: injector placement question
 
I have an 01 and an 04 both with the injectors turned in to help hide the wiring.


All times are GMT -4. The time now is 05:29 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com