The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   LSx Swaps (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=206)
-   -   4l60e interchangeable? (https://67-72chevytrucks.com/vboard/showthread.php?t=439769)

72gmcshorty 01-10-2011 12:09 AM

4l60e interchangeable?
 
What needs to be done to make a 4l60e from a 97 or 99 z28 work with my 2006 5.3 truck motor? My harness is also 2006

78bronzechariot 01-10-2011 12:24 AM

Re: 4l60e interchangeable?
 
I had one out of a '95 caprice laying around and had thought about putting it behind my 2002 vortec. I'm not 100% but if I remember right, but they switched them to a pulse width modulated pump in '96 on rwd cars and '97 on trucks I was told that mine would not interchange. From those points up, I am pretty sure they are electronically the same, so yours should work. if you are using one that has the case and bellhousing for a genI/II (one piece case and bellhousing), I think you will need to get the flexplate spacer for running a th350/400 behind a genIII/IV engine.

63chevyll 01-10-2011 12:24 AM

Re: 4l60e interchangeable?
 
should bolt right up, maybe just change trans mount...and the connector should work also


All times are GMT -4. The time now is 07:41 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com