New Member
 

Hi all! Some may know me from other message boards and hear about this one so I thought I might join and help out as well as ask questions when I can. I have a 79 Bonanza Big 10. I'm the second owner and have been restoring it as well as customizing it to what I like. I have pics of the truck and what I have done to it since it died on me and was in a pasture for 2 years. The sound file doesn't work as it has before but I can email you the MP3 of it if you would like.

Future plans include getting a 3.73 rear end and posi (looking for first) and tehn upgrading the front end and interior. Last will be rear suspension and 700r4 then paint finally.

Sorry for the long post. Let me know what you think about it.

------------------
BRANDON
1979 CHEVROLET BONANZA BIG10
350 GM Crate Engine ZZ4,1406 Edelbrock, 1 5/8" Heddman Headers
2 1/2" Dual Exhaust with X pipe and Flowmaster 40 Series Mufflers,350 Turbo Transmission,3.07 Gears

My website for the truck.

Welcome to the board FNG. http://67-72chevytrucks.com/board/ubbhtml/wink.gif I think you'll like hanging around here. We are friendly and polite. Good place to ask questions and mostly to find some good parts too.

I like the exhaust setup. I just bought two flowmastes for $50.00 from a guy who sold his truck. Just need headers and one more cat. Dual exhaust getting closer to being added.

------------------
Gerardo
1983 Custom Truck
TX Plates: "BAD BOW"
http://www.geocities.com/abetterchemist/

Hey 79big10 i'm on ch**y**lk too you just sent me that sound clip a couple days ago definatly convinced me to use the flows. this is a good board and we could use some more 73-87 members on it!

------------------
Pot holes are my enemy

'84 1\2 ton swb, 350 5\7 drop

just sold '64 1\2 ton
4\4 drop with built 350 (my toy)

Low84- I thought that was you there. Thanks for the compliments. I really like the sound too. I have thought about adding tips but decided that it would sound more like a mus**** and that's not what I want at all.

hey brandon, this is me from chevytalk also. well well look here, look at all the people that frequent both. http://67-72chevytrucks.com/board/ubbhtml/biggrin.gif i love both sites, in fact they are the only ones i frequent

------------------
85 C10 350/700r4
COMPCAMS XE262 "K" kit
compcams magnum roller rocks (SOON I HOPE)
91'BURB GRILL CONVERTION
HOLLEY STREET DOMINATOR INTAKE
EDELBROCK 1406 COMP. SERIES CARB.
HYPERTECH POWER COIL
FACTORY HEADERS
MAGNAFLOW CAT/MUFFLER/3in. EXHAUST
3.42 REAR GEARS
PROTHANE SUSPENSION-TOTAL KIT
DUAL 13" ELECTRIC FANS
and still going
"thats my toy"
Jeff Dodson
Angleton,Tx.

Brandon,
Did you forget to send me you sound clip for me to put back on my page?

------------------
Chris Lucas
1973 Chevy C-10
1975 Chevy Silverado
Captkaos Customs

http://67-72chevytrucks.com/board/ubbhtml/wink.gif What's up I'm new today as well, hope to chat with you all.
78 short bed
84 front clip(as of last weekend)
still needs lots of work, have parts but no time...
250 inline/munual trans(hope to put in the 700r4 taking up space in the garage)
air bags 17" wheels
and some rust, untill I have time to fix it..

78ondaflr,

Welcome the board. You'll like hanging around here. Good luck with your project. I've been working on mine for 2.5 years.

------------------
Gerardo
1983 Custom Truck
TX Plates: "BAD BOW"

hey brandon, about time you found this place! this is bored&stroked from chevytalk http://67-72chevytrucks.com/board/ubbhtml/smile.gif
I come here every once in a while, as time permits.

------------------
78 c10 short/stepside: 383/M20/12 bolt

79 c10 short/wide: vortec 350,th350/12 bolt

99 accord v6: 200hp 3.0L, high flow intake tube w/ K&N, much more to come [think classy, not rice!]

Thanks Tom. I'm the same way.

------------------
BRANDON
1979 CHEVROLET BONANZA BIG10
350 GM Crate Engine ZZ4,1406 Edelbrock, 1 5/8" Heddman Headers
2 1/2" Dual Exhaust with X pipe and Flowmaster 40 Series Mufflers,350 Turbo Transmission,3.07 Gears

My website for the truck.