Project X, with a twist!!!
 

A customer called and wanted an ultra low truck with all the bells and whistles. He wanted to fit up to a 30 inch tall tire and lay out. Then he tells me he wants to use Scotts suspension from Scotts Hotrods out in Oxnard. I quickly said yes and looked forward to seeing what the boys over there were up to. I'd had some experience with Scotts stuff from working on hotrods and was very impressed but hadn't got the chance to play with the C10 stuff they've been working on. So here it goes.
http://i131.photobucket.com/albums/p...s/IMG_0282.jpg

Fully tig welded with cross supports that go right through the cross member.
http://i131.photobucket.com/albums/p...s/IMG_0284.jpg
http://i131.photobucket.com/albums/p...s/IMG_0281.jpg

Re: Project X, with a twist!!!
 

AWESOME welds. I would give almost anything if i could weld like that.

Re: Project X, with a twist!!!
 

I agree - until I got my own welder, I used to think "what could be so hard..." That's a beautiful piece of gear ya got there. Can't wait to see the build on this one.

Re: Project X, with a twist!!!
 

Ya pretty amazing fabrication. Started bolting it in today, went right in. No problems.
http://i131.photobucket.com/albums/p...s/IMG_0299.jpg
http://i131.photobucket.com/albums/p...s/IMG_0289.jpg
http://i131.photobucket.com/albums/p...s/IMG_0298.jpg
http://i131.photobucket.com/albums/p...IMG_0300-1.jpg

Re: Project X, with a twist!!!
 

duuude so sic !! the dudes got skills,i been talking with him about a blazer he has and maybe making a deal on it , nice start del and the way you work it should be on the road by monday:lol::lol:

Re: Project X, with a twist!!!
 

Getting closer and your tank will be done in a couple of days
Justin

Re: Project X, with a twist!!!
 

Looks killer dell!!! Dino the blazer would/will be siiiiiiiick......
Posted via Mobile Device

Re: Project X, with a twist!!!
 

Thanks man.

Here is the rear crossmember, looks like it fits up to 3 inch exhaust. It's set up for either the stock style support bearing or one of those fancy billet ones.
http://i131.photobucket.com/albums/p...s/IMG_0285.jpg
http://i131.photobucket.com/albums/p...s/IMG_0288.jpg
Bolted right in, no problems.
http://i131.photobucket.com/albums/p...s/IMG_0296.jpg

Re: Project X, with a twist!!!
 

damn movin right along!

Re: Project X, with a twist!!!
 

WHAT ITS NOT DONE YET!!! YO SLIPIN DEL:lol::lol:

Re: Project X, with a twist!!!
 

Look'n good delmo :metal:
Posted via Mobile Device

Re: Project X, with a twist!!!
 

Damn, that looks like an awesome piece right there. Can't wait to see it all finished up.

Re: Project X, with a twist!!!
 

ah it will be done by tomorrow

Re: Project X, with a twist!!!
 

Some shots of the control arms and spidles bolted up. As you can see there is no notching required for the rack.
http://i131.photobucket.com/albums/p...s/IMG_0307.jpg
http://i131.photobucket.com/albums/p...s/IMG_0309.jpg

I'll get some pics with the suspension compressed and you can see how good the tie rods stay inline with lower arms.
http://i131.photobucket.com/albums/p...s/IMG_0306.jpg
http://i131.photobucket.com/albums/p...s/IMG_0305.jpg

Re: Project X, with a twist!!!
 

Sweet looks so sick
Posted via Mobile Device

Re: Project X, with a twist!!!
 

Nice very trick set up !!! I was wondering what you were working on ?? Hows OL Blue Balls ????

Re: Project X, with a twist!!!
 

Thanks guys, I love my job. LOL

Kart, Ol blue balls is my driver until I get the nerve to tear it down. It drives some dang good.

Re: Project X, with a twist!!!
 

Kool, Cannot wait when you build that ride. Hey Will Hudson is stoked about the wheels. Hope he orders a set soon.

hey were did you buy your front rotors? looking for drilled and slotted 5x5 for Nates spindles?

Re: Project X, with a twist!!!
 

kart34 we have them available check them out in our wilwood d52 caliper special thread in vendor market place

Re: Project X, with a twist!!!
 

Very interesting .... I'm in.

Ratty 46

Re: Project X, with a twist!!!
 

I cant wait till I get mine!!! Got a little more saving up to do but man its a much better deal to get the whole package together... no guess work involved. Idiot proof right Justin, I mean if your brother can do it !!! :metal::mm:

Re: Project X, with a twist!!!
 

You got that right.
Justin

Re: Project X, with a twist!!!
 

Coming along good Delmo!!!!
Posted via Mobile Device

Re: Project X, with a twist!!!
 

That front end set up sure is nice.

Re: Project X, with a twist!!!
 

updates?