The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   pics of your rears please (https://67-72chevytrucks.com/vboard/showthread.php?t=443622)

stepside83 01-30-2011 12:19 AM

pics of your rears please
 
im building a 1983 chevy c-10 stepside, its gonna be lowered 3 inch in front and 5 in rear, with a fuel cell under bed back by tail gate, im trying to decide what would look better a roll pan or the factory chrome bumper, or anything else that looks cool and hides as much of the fuel cell as possible any and all pics are apperacited

N2TRUX 01-30-2011 12:46 AM

Re: pics of your rears please
 
1 Attachment(s)
Why are you going with a fuel cell? They hand really low when installed in the rear. Unless you need a cell for safety regulations, I would consider a Blazer tank instead.

3r!c84 01-30-2011 01:48 AM

Re: pics of your rears please
 
yea i like a blazer tank idea better. heres mine. tucked in

http://i995.photobucket.com/albums/a...9/P1030433.jpg

dbmx66 01-30-2011 03:44 AM

Re: pics of your rears please
 
2 Attachment(s)
heres mine with the original fuel cell, then the new one

stepside83 01-30-2011 10:25 AM

Re: pics of your rears please
 
well to be honest i picked a fuel cell because i didnt know a blazer tank would work and i just never really thought of that as an option, how hard is it to install one, under the bed back by the bumper? and does anyone have pics of roll pans/ rear bumpers on a step side? thanks

bigblock73 01-30-2011 10:53 AM

Re: pics of your rears please
 
A 16 gallon fuel cell will fit your truck just fine, and be concealed if run with a back bumper.

http://73-87.com/7387garage/chassis_...ellinstall.htm

I'll post pics later with my back bumper installed so you can see.

MILLER TIME 01-30-2011 11:11 AM

Re: pics of your rears please
 
please do Id like to do the same thing.

superwade57 01-30-2011 12:24 PM

Re: pics of your rears please
 
Quote:

Originally Posted by N2TRUX (Post 4448427)
Why are you going with a fuel cell? They hand really low when installed in the rear. Unless you need a cell for safety regulations, I would consider a Blazer tank instead.

im pretty knew here, ive never heard of usig the blazer tank but it sounds like a common trick a lot of you guys use? can some one fill me in on where the blazer tank is located and whats involved in a swap?

Malo83 01-30-2011 01:22 PM

Re: pics of your rears please
 
Try here ;)
http://www.captkaoscustoms.com/blazertank.html

stepside83 01-31-2011 05:59 AM

Re: pics of your rears please
 
all right thanks guys, for some info, still wouldnt mind to see some more pics tho...

swb85 01-31-2011 10:59 AM

Re: pics of your rears please
 
here's mine.....

http://i85.photobucket.com/albums/k5...h/P1010606.jpg

thesickc10 01-31-2011 11:40 AM

Re: pics of your rears please
 
from what ive heard its tricky to run dual exhaust out the back with the blazer tank. correct me if i am wrong.

West Texas Z 01-31-2011 12:20 PM

Re: pics of your rears please
 
Quote:

Originally Posted by thesickc10 (Post 4451818)
from what ive heard its tricky to run dual exhaust out the back with the blazer tank. correct me if i am wrong.

Dump it. :metal:

thesickc10 01-31-2011 01:10 PM

Re: pics of your rears please
 
Quote:

Originally Posted by West Texas Z (Post 4451901)
Dump it. :metal:

has to exit the truck beyond the cab in Pennsylvania to be legal. but i dont care about legal because my brother inspects my vehicles!

West Texas Z 01-31-2011 01:19 PM

Re: pics of your rears please
 
Quote:

Originally Posted by thesickc10 (Post 4451967)
has to exit the truck beyond the cab in Pennsylvania to be legal. but i dont care about legal because my brother inspects my vehicles!

Same in Texas..... I have mine shoved before the rear axle. Sounds amazing, and I'm legal. :)

givengold 02-01-2011 02:39 AM

Re: pics of your rears please
 
One thing the stepsides have going for them is the variety of tail light treatments that you can do. Mine has a roll pan with cutouts for the exhaust and '39 Ford dual tail lights with the blue dot. When I get it back from the shop, I will post a pic. I used oval fog lights frenched into the roll pan for back up lights.

West Texas Z 02-01-2011 10:43 AM

Re: pics of your rears please
 
http://i91.photobucket.com/albums/k3.../Photo0123.jpg

Aegeas 02-01-2011 11:29 AM

Re: pics of your rears please
 
How one of the smart@$$s on this board hasn't put a picture of his OWN backside up here in this thread is completely beyond me. I don't know whether to be pleasantly surprised or disappointed. Maybe we just have a classier crew of denizens here on this board.

N2TRUX 02-01-2011 11:31 AM

Re: pics of your rears please
 
Please don't encourage anyone. What has been seen, cannot be unseen...;)

Aegeas 02-01-2011 11:34 AM

Re: pics of your rears please
 
Preach it brother. My K20 is set high so I know it is not the kind of rear end he is looking for in this thread or I would post my own.

allengator 02-01-2011 11:35 AM

Re: pics of your rears please
 
Quote:

Originally Posted by thesickc10 (Post 4451967)
has to exit the truck beyond the cab in Pennsylvania to be legal. but i dont care about legal because my brother inspects my vehicles!

legal and SAFE...
Carbon monoxide at idle and all.....

West Texas Z 02-01-2011 11:37 AM

Re: pics of your rears please
 
Quote:

Originally Posted by Aegeas (Post 4454358)
How one of the smart@$$s on this board hasn't put a picture of his OWN backside up here in this thread is completely beyond me. I don't know whether to be pleasantly surprised or disappointed. Maybe we just have a classier crew of denizens here on this board.

Oh, I thought about it....I did...but I like posting on this site. :lol:

bark 02-01-2011 12:06 PM

Re: pics of your rears please
 
2 Attachment(s)
here, old custom bumper, would look better on a cranked up 4x

and then new, factory bumper with custom mounts to snug it up, and also some led tails to clean it up

stepside83 02-01-2011 12:32 PM

Re: pics of your rears please
 
Quote:

Originally Posted by givengold (Post 4453949)
One thing the stepsides have going for them is the variety of tail light treatments that you can do. Mine has a roll pan with cutouts for the exhaust and '39 Ford dual tail lights with the blue dot. When I get it back from the shop, I will post a pic. I used oval fog lights frenched into the roll pan for back up lights.

deff cant wait to see the pics, i wanted to do something a lil different with the tail lights also, i like the iron cross, i found a set on ebay, but not sure if i want to use them now, so i guess i should of posted that i wanted to see rear bumper/ roll pans and tail light ideas for step sides just to see what you guys have done

West Texas Z 02-01-2011 12:34 PM

Re: pics of your rears please
 
Bark, that looks 100x better man. Thumbs up!


All times are GMT -4. The time now is 08:41 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com