The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)

- - which ram horn? (https://67-72chevytrucks.com/vboard/showthread.php?t=444270)

neto	02-02-2011 12:09 AM

which ram horn?

I'm have a 95 engine to put in a 1966 truck. Which ram horn should I use? There are two one with the drivers side pointing back and the others are both pointing down. 700r4 transmission. Going to order them just trying to figure which ones.
Thanks

markeb01

02-02-2011 12:26 AM

Re: which ram horn?

I'm running the straight down version on the passenger side and the angled back style on the driver side. It appears the straight down style might fit, but the angled version provides more clearance. I'm running a hydraulic clutch, not sure if one manifold over the other would work better with mechanical linkage.

http://img692.imageshack.us/img692/2134/post01j.jpg

Bugeyev8

02-02-2011 12:34 AM

Re: which ram horn?

I have two straight down center dumps on my 62, running a 700R4 trans, no issues

neto	02-02-2011 12:56 AM

Re: which ram horn?

Thanks guys. Looks like I will order the straight down type. This is a great forum. You ask a question and it gets answered with pictures even.
Thanks again.

All times are GMT -4. The time now is 01:23 PM.