68 workhorse
 

this is my new workhorse. it will replace my van. thinking of keeping it a manual but would like Overdrive. i want all original trim.

i cut out my mess in my pixs. i scrap collect so alot of stuff gets dumped in my yard until i get a chance to clean it lol.

http://i1120.photobucket.com/albums/...dchuy/edit.jpg
http://i1120.photobucket.com/albums/...y/SAM_0275.jpg

http://i1120.photobucket.com/albums/...y/SAM_0274.jpg

http://i1120.photobucket.com/albums/...y/SAM_0273.jpg

Re: 68 workhorse
 

like we talked about you will need :
67-8 glove box emblem
cst emblems for the dors you can get the 69 72 blazer cst emblems to
full floor carpet
buddy buckets would be more deluxe...
cst full wheel covers
and theres more stuff but those are the basic upgrades on a cst compered to a custom cab truck oh and you need a passenger inner fender well:lol: and some trim... nice you should install the grill trim!

Re: 68 workhorse
 

the inner fender is in the back of the bed lol. i also got 2 sets in the backyard somewhere.

Re: 68 workhorse
 

~have some trim for the hood and fenders ''eyebrow trim'' but it is kinda ruff you can have it along with the c 10 fender emblem

Re: 68 workhorse
 

see we need more pics!

Re: 68 workhorse
 

oh the shortbed i got is also in the back of it along with some other parts.
you can see my 72 in the back ground. You can also see my ghetto rig tarp i talked about in another thread.


i would have posted more pixs but i was trying to eliminate my yard mess.

Re: 68 workhorse
 

who cares you should have ssen my garage at my old house!

Re: 68 workhorse
 

its up and running runs fine. i replaced the front tire with a spare one i had, not the same size as the others 5 less on the sidewall.

some of the lights stay on so i have to disconnect the neg when not using. im also having an issue with the signals working when they feel like it. temp gauge dont work. i'll have to check that.

Re: 68 workhorse
 

well your good with electrics so i have faith in you

Re: 68 workhorse
 

looks like a great truck! But we do need more pics :lol:

Re: 68 workhorse
 

yes eric is right!

Re: 68 workhorse
 

ok. i'll get more, what specifically though?

Re: 68 workhorse
 

open the driver door and take a pic from that angle, then take a side shot of the passenger ,then a rear shot and last but not least and inside shot of the bed PLEASE

Re: 68 workhorse
 

well bed as soon as i have time to get the shortbed outta of it lol.

Re: 68 workhorse
 

wow you have the short bed in the bed of your 68!?

Re: 68 workhorse
 

yeah you should be able to see it in the first pix. its all in there,

Re: 68 workhorse
 

ya i see it

Re: 68 workhorse
 

any progress onb this rig!

Re: 68 workhorse
 

not yet, tomorrow if i get a chance i'll swap in my good 68 fender i had tried to sell earlier. i'll add some gas and see if i can figure out the final wiring bugs.

Re: 68 workhorse
 

alright sounds good remember to take pics!

Re: 68 workhorse
 

got a lil done but nor really.
http://i1120.photobucket.com/albums/...uy/photo-8.jpg

http://i1120.photobucket.com/albums/...y/SAM_0517.jpg

i stll need to find out what this goes to. (black wire)
http://i1120.photobucket.com/albums/...y/SAM_0518.jpg

this red wire too, its just there.
http://i1120.photobucket.com/albums/...y/SAM_0519.jpg

when i was inside the engine bay i broke this
http://i1120.photobucket.com/albums/...y/SAM_0520.jpg

i noticed that the fender lights are empty sockets, there arent even wires for lights.
http://i1120.photobucket.com/albums/...y/SAM_0521.jpg

Re: 68 workhorse
 

ya you need a 71 72 wireing harness so you can have lights for the maker lights the inner fender looks good did you get the good fender on and the bad one off of the truck, or not yet?

Re: 68 workhorse
 

i forgot to add in my last post, this is also my new problem. its leaking on both sides. hopefully im able to get that carb from LennyGB53 otherwise i have to rebuild the other one i have. still need to order the kit.
http://i1120.photobucket.com/albums/...y/SAM_0497.jpg



heres some more pixs of the 68.
http://i1120.photobucket.com/albums/...y/SAM_0503.jpg

http://i1120.photobucket.com/albums/...y/SAM_0502.jpg

http://i1120.photobucket.com/albums/...y/SAM_0500.jpg

http://i1120.photobucket.com/albums/...y/SAM_0516.jpg

and here he is playing inside the 68.
http://i1120.photobucket.com/albums/...y/SAM_0531.jpg

http://i1120.photobucket.com/albums/...y/SAM_0537.jpg

http://i1120.photobucket.com/albums/...y/SAM_0535.jpg

and this is what happens when you tell him no ore truck, time to go inside.
http://i1120.photobucket.com/albums/...y/SAM_0527.jpg

Re: 68 workhorse
 

no, no fender yet. the cleaning takes so much time...

Re: 68 workhorse
 

hahah cool kid i am guessing he is chuy? are you gonna keep the brown? and what is your plan with the choke delete?