The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Corner Molding Restore (https://67-72chevytrucks.com/vboard/showthread.php?t=446380)

JMac11

02-12-2011 08:41 PM

Corner Molding Restore

Tried "Searchy" no luck......

Anyone have any luck restoring the corner side molding pieces? Mine are the Scottsdale one with the black in the middle.... Figure paint strip, polish with NeverDull then repaint with Semigloss black?

78 Chevyrado

02-13-2011 02:49 PM

Re: Corner Molding Restore

Here's what I did to my tailgate band to restore it. It's the same thing as for the cab mouldings.
My Build Thread
Look at the 5th and 7th posts from the bottom.

Remember: If you DO sand on it at all, don't sand at all on the smooth parts and go with the grain where it's brushed. It'll be cleared so anything you do will be AMPLIFIED when you clear it.

I did that band 2.5 years ago and it still looks like it was just done.

All times are GMT -4. The time now is 10:12 PM.