The 1947 - Present Chevrolet & GMC Truck Message Board Network - TX Looking for some 1.5" blocks and u-bolts

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)

- - TX Looking for some 1.5" blocks and u-bolts (https://67-72chevytrucks.com/vboard/showthread.php?t=446903)

kev2809

02-14-2011 08:04 PM

Looking for some 1.5" blocks and u-bolts

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Tim Christian

02-14-2011 09:28 PM

Re: Looking for some 1.5" blocks and u-bolts

I have two blocks and one U-bolt but will have to look to see what size the blocks are.

kev2809

03-13-2011 05:04 PM

Re: Looking for some 1.5" blocks and u-bolts

anyone?

Tim Christian

03-13-2011 08:09 PM

Re: Looking for some 1.5" blocks and u-bolts

The Blocks I have are brand new but only a inch thick. Sorry

kev2809

03-14-2011 10:51 AM

Re: Looking for some 1.5" blocks and u-bolts

dang...well thats cool...thanks for checking!

anyone else wanna gain half an inch!? :)

bguild

03-14-2011 11:23 AM

Re: Looking for some 1.5" blocks and u-bolts

I might be interested in your 2 inch blocks

kev2809

03-21-2011 01:02 PM

Re: Looking for some 1.5" blocks and u-bolts

i dont mind sellin em to ya but i need some to put in before i take these out

esosa67

03-21-2011 03:18 PM

Re: Looking for some 1.5" blocks and u-bolts

i'll get next in line for the 2inch block if you sell after you get 1.5inch blocks. thanks..

PICKMUP

03-21-2011 04:32 PM

Re: Looking for some 1.5" blocks and u-bolts

3 Attachment(s)

I have 1.25" blocks cut from high grade aluminum (Boeing). $40 shipped & I have new ubolts w/hardware for $40 shipped. Just drill your own holes.

kev2809

03-21-2011 09:29 PM

Re: Looking for some 1.5" blocks and u-bolts

thanks but ill thank ill keep looking. at the place i go to they usually charge me about 5-10 bucks to drill holes!

PICKMUP

03-22-2011 04:51 PM

Re: Looking for some 1.5" blocks and u-bolts

CPP has them for $69pr...

mstrav1973

03-22-2011 06:00 PM

Re: Looking for some 1.5" blocks and u-bolts

here is a link to some for $21 from 4wheelparts

Matt

http://www.4wheelparts.com/Lift-Kits...t_pn=EXP95-150

kev2809

03-22-2011 09:11 PM

Re: Looking for some 1.5" blocks and u-bolts

Quote:

Originally Posted by PICKMUP (Post 4570255)

CPP has them for $69pr...

thanks, if i cant find a trade i might just have to go that route!

Quote:

Originally Posted by mstrav1973 (Post 4570410)

here is a link to some for $21 from 4wheelparts

Matt

http://www.4wheelparts.com/Lift-Kits...t_pn=EXP95-150

i was looking at those last night lol. i dont think those would fit our trucks though...they look like the ones i had on my s10 years ago. ours have direct holes for the u bolt to go through, those go in between the leaf springs and axle i think.

kev2809

04-25-2011 12:30 PM

Re: Looking for some 1.5" blocks and u-bolts

ttt...anyone want to straight up trade?

oldblue1968chevy

04-25-2011 10:01 PM

Re: Looking for some 1.5" blocks and u-bolts

So you have both U bolts now? Or I would need to buy 1 U bolt?

I have U bolts on my truck that're long enough for a 1" block (maybe 1 1/4")

Im interested in a 2" drop block but I cant have my truck down for more than a afternoon or so (DD)

All times are GMT -4. The time now is 03:35 AM.