The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   i might have found a 6.0 (https://67-72chevytrucks.com/vboard/showthread.php?t=448368)

low man 02-21-2011 07:18 PM

i might have found a 6.0
 
i might be picking up a 2001 gmc sierra 4x4 that has the front end smashed,if i get it for a good price is it worth it?or is there a better year to get?if i get it what do i realy need to keep if i use it fuel injected?i might go carburated,but ill have time to figure that out

Shawn5488 02-21-2011 07:59 PM

Re: i might have found a 6.0
 
Leave the intake and fuel injection on it just like it is, that is a good year to get as there is no fly by wire, just need stand alone electronics (several suppliers) and you are good to go. Use the trans. to!, might as well use the 14bolt and disk brakes while you are at it, can be switched to 6 lug if you like.


Do a search on here and all over the internet, this is all the rave right now, TONS of talk out there!

low man 02-21-2011 08:26 PM

Re: i might have found a 6.0
 
its going in my 2wd,so either i get an other trans or use my 700r4

Clyde65 02-22-2011 12:11 PM

Re: i might have found a 6.0
 
Id use your 700, hopefully it is a little built to handle the HP the 6.0 will muster. Right out of the box with a performance tune and headers it should run 400HP easily. If you do a cam and such, &450-500 is not unrealistic at all.

Shawn5488 02-22-2011 07:36 PM

Re: i might have found a 6.0
 
Why cant you use the 4L80E in your truck?

Clyde65 02-22-2011 07:44 PM

Re: i might have found a 6.0
 
just my .02, I would throw the 6.0 in there with the 700, take it easy for a while and when your ready to upgrade the cam and such, go ahead and upgrade the trans too.

low man 02-23-2011 10:51 AM

Re: i might have found a 6.0
 
i went and looked at the truck yesterday,man did he hit hard,im going to make a redicules offer on it.and if he takes it il se if theres anything worth salvaging.its hard to tell,but the frame is all bent,and he took the wheels of so its sitting on the ground


All times are GMT -4. The time now is 06:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com