The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - control arm bushings (https://67-72chevytrucks.com/vboard/showthread.php?t=449479)

one low c10

02-26-2011 09:24 PM

control arm bushings

so I am getting ready to put my front suspension back together and was wondering if the control arm bushings need to be pressed back in or could I just tighten the nuts down to draw them in? I imagine they have to be pressed but didnt know if anyone has tried it or not.

Gyawo

02-26-2011 10:19 PM

Re: control arm bushings

They need to be pressed in. You'll probably tear them/go in uneven/wonky doing it the way you want to try. All you need is a hydraulic press, nothing too fancy, and a few old bearing races/discs. Haven't tried it that way, I'm sure my journeyman would flip **** on me if I did though...

texasbigbear_wink

02-26-2011 11:17 PM

Re: control arm bushings

You can do it.. I did mine you just need a good air hammer.

http://i1210.photobucket.com/albums/...1/0756c3c9.jpg

http://i1210.photobucket.com/albums/...1/370435ed.jpg

http://i1210.photobucket.com/albums/...1/7aea30b7.jpg

http://i1210.photobucket.com/albums/...1/0f620423.jpg

All times are GMT -4. The time now is 08:16 AM.