Going to try this seat in the 62 and 67
 

Got 2 seats from a 95 Chevy crew cab. Going to try 1 in the 62 K10, and 1 in the 67 K20. The blue will go good in the 67, will have to find a camo seat cover for the 62. The headrests will come off. Anyone done this and want to save me some blood or headaches?

Re: Going to try this seat in the 62 and 67
 

Nice looking seats!

Install should be a piece of cake as long as you have a helper. Worst case... you will be drilling 4 holes. :metal:

Re: Going to try this seat in the 62 and 67
 

how thick is the back on these? I'm trying to find a nice thin seat that will give me some extra leg clearance.

Re: Going to try this seat in the 62 and 67
 

Theses were from a 95 Chevy crew cab. Here's what I found out. The front seat won't work, too big. They look about the same, but it's obvious after sticking them in there. The good news is the rear seat works great. The front 2 bolt holes will even line up, and the seat will move forward and back. Here's a pic in the 62.....then the 67.....same seat in both. I think I'll it in the 62, didn't like the original at all. The bench from the 67 is in great shape and has plenty of room.