console and door panels
 

Cup holder console and 72 deluxe door panels that came with some parts I just bought.console has med red metalic color but matches very good with a set of factory red covers on a set of my bucket seat cores.$200 shipped door panels are parchment and have been dyed or painted.You can not see it in the picture but up close the grain has some scratches and wear under the new paint.no extra holes or cracks.Very good for a daily driver $70 shipped.Attachment 716554

Attachment 716555

Attachment 716556I have gmc emblem for console if needed instead of chevy

Re: console and door panels
 

you do have the woodgrain for the door pannels right? and the bucket cores you have are 72 style??

Re: console and door panels
 

Attachment 716638I posted wrong pic in first listing.Note first door panel pic has passenger side on top and a screw hole on the top and bottom rear of panel.these are extra and incorrect.I am giving this set of panels to my buddy for his work truck.Note the pic in this post has passenger side on top and 1 screw hole in the middle rear this is correct for the 72 cheyenne and is the set I have for sale.I do not have woodgrain or stainless trim for these panels.the red bucket seat cores I have are 69 cst buckets.these are the only factory red seat I have to compare the console with.it is not the original factory color but is very close and goes nicely with the seats I have.I have a console in the factory red and it is has a dull flat look.this consoles color is close but has a shine to it maybe a little bit more of a maroon.It is way to nice for me to strip and repaint because the color isn't a perfect stock match.I can't tell you the exact color be cause I got it this way with some other parts.I just placed an order for 8 sets of bucket seat covers and none are red.

Re: console and door panels
 

Donald... I think i have a set of chrome for your door panels. Call me in the morning & remind me.... It would really set those off. ;) john

Re: console and door panels
 

Ill take the door panels

Re: console and door panels
 

you got em.pm me your shipping info and I'll box them tomorrow and ship monday.

Re: console and door panels
 

Attachment 725544Ernest I did leave the L out of your name.It has both our addresses on the other side.I made sure they were well wrapped and protected and the box is completely sealed with shipping tape.

Re: console and door panels
 

You have not included tracking #. Leaving one letter off my name should not have any effect on delevery

Re: console and door panels
 

Attachment 725895shipped 03/24/2011 I guess I should have asked for tracking # but I have never lost but 1 package and it was my fault for getting the zip wrong so I ate it.If package does not show up by monday I will refund you $35 and split the loss with you.

Re: console and door panels
 

Glad your panels showed up ernest.ttt for the console.

Re: console and door panels
 

Donald... If you don't sell that console this week, bring it with you when you come to visit. I'll be able to use it in one of my old trucks & well either swap something or I'll buy it outright. John

Re: console and door panels
 

Will do John.I have a dozen disassembled and stripped ready to dye right now.I have 10 sets of bucket seat covers to start restoring and saleing a few of my seats .I have everything but red and this just looks to good to redo.

Re: console and door panels
 

It does look pretty, & my military trucks have marroon interiors so... It'll work. That new krylon fusion paint for plastic works great, & they have a marroon thats just about the right stock G.M. Color. (I did a console in that) John

Re: console and door panels
 

i have 72 gmc p /up with that console do i have to drill holes in floor pan or is it a bolt right in. thanks....johnny

Re: console and door panels
 

I have a front and set of the rear spacers to make it set higher to match the newer seats you can have also.Attachment 727148

Attachment 727149I sprayed this one with plasticote med blue to see how it matched my seat covers but its to dark and the sem dye I have found is to light.

Re: console and door panels
 

if your truck has had a console the 4 holes will be there.if not just set the console in place centered up and mark the holes with a scribe or shape nail and drill.

Re: console and door panels
 

How much for a solid console or all the parts to make one??
CUP HOLDER CONSOLE