Can I have some Step notch pics/help?
 

Im going to be installing a step notch I got from QAR(suicidedoors). Well yesterday, I tacked one side together to see what it will look like and I kinda got nervous about what I'm about to do. What I think I'm going to do is knock it back loose and tack the sides to the frame and tack it together like that and see how it looks. Can someone post up some installation pictures or just some good pics for me to get a better idea? It's going on a 67 swb stepper too btw. Any help or advice will be greatly appreciated.

Re: Can I have some Step notch pics/help?
 

Can someone just point me toward a thread maybe? I know someone has some knowledge about step notches.
Posted via Mobile Device

Re: Can I have some Step notch pics/help?
 

ask and you shall recieve-----------------------http://67-72chevytrucks.com/vboard/showthread.php?t=393867

Re: Can I have some Step notch pics/help?
 

Here is the KP notch in a 67-72. Not sure what year you are building.
http://67-72chevytrucks.com/vboard/s...d.php?t=188332

http://www.kplinks.com/media/blackc104.jpg

http://www.kplinks.com/media/blackc103.jpg

http://www.kplinks.com/media/blackc102.jpg

Always loved this truck:
http://www.kplinks.com/media/blackc105.jpg

Re: Can I have some Step notch pics/help?
 

http://i1017.photobucket.com/albums/...5/af2f4a47.jpg
Posted via Mobile Device

Re: Can I have some Step notch pics/help?
 

When I install the step, where am I supposed to position it on the frame? I mean is the top of the step supposed to be centered on the axel? Is the truck supposed to be at ride height or dropped when I install it? Stuff like that is where my problems are. Thanks for the pictures too.
Posted via Mobile Device

Re: Can I have some Step notch pics/help?
 

Re: Can I have some Step notch pics/help?
 

mine is from suicide doors i did like you were doing tacked it together and set in on and finished it up

Re: Can I have some Step notch pics/help?
 

and a few more, i added a little support in front of the notch, i boxed the frame a little

Re: Can I have some Step notch pics/help?
 

Thanks 67chevy, what are or did you put back in place of those cross sections you had to cut out to fit the notch? Or do you not need anything due to the cross section between the notches?
Posted via Mobile Device

Re: Can I have some Step notch pics/help?
 

here are some pics

Re: Can I have some Step notch pics/help?
 

Wow, that looks a little complicated. Thanks though man, I'm going to check out your thread. That's what I was hoping this thread would do, bring some people in with build threads I can check out. Thanks again man, I really appreciate it.
Posted via Mobile Device

Re: Can I have some Step notch pics/help?
 

Oh yeah, I also think I'm going to make a install for the FAQ. Just hope I don't mess up!
Posted via Mobile Device

Re: Can I have some Step notch pics/help?
 

I too am just about to fitt a step notch,

My thoughts are; measure the small arc from the front center mounting bolt of the rear controll bars, (main link from crossmember to axle) and add diameter of axle + 1" either side for clearance, put this middle bottemed out dimension in the center of your c notch,

?? ore have i got it wrong,??

Re: Can I have some Step notch pics/help?
 

I was hoping to attract some people who have done this and put it in thee build thread, so far only 67chevy has posted.
Posted via Mobile Device

Re: Can I have some Step notch pics/help?
 

Im not quite following you bud, lol that's why I need help myself though!
Posted via Mobile Device

Re: Can I have some Step notch pics/help?
 

Most people center the notch over the axle. But you have a few things to consider first. do you have a 4 link, stock truck arms , or stock leaf springs ?.
a 4 link will keep the axle pretty close to center most of the time as well as a leaf spring ( mono leaf + blocks) however the truck arms will move the axle back when lowered untill parallel with the frame then forward after parallel of the frame rails,. so do you want the axle centered when driving or when dropped or both? thats the difference between a truck and a show truck.
you can see on the black truck the wheels are shifted forward a bit when laid out. so do you care or not. some people move the truck arm crossmember to accomodate their axle position. either way its your call but once you weld the notch in, the axle should be centered above the location you chose...

Re: Can I have some Step notch pics/help?
 

nice looking notches.

Re: Can I have some Step notch pics/help?
 

wish my truck looked like that black one or 67chebys they are both awesome looking! , guess i should go work on my rust....

Re: Can I have some Step notch pics/help?
 

....just so you know....i have been working on mine for 8 years.............so dont envy me to much

Re: Can I have some Step notch pics/help?
 

....just so you know....i have been working on mine for 8 years.............so dont envy me to much
__________________

i know it 67cheby ive been watching you... ive had 2 bagged late model trucks one sold before the wedding the other i just got tired of it,(i didnt build it) and i always wanted a 67 , finally found one i could do something with and it sat for 5 years untill a few months ago. im old enough to have patience and do alot of work myself. now if i could just find a 62 impala to add to the collection , "honey we need to add a garage onto the new house" hahahahahahaha

Re: Can I have some Step notch pics/help?
 

how about a 63 ?

Re: Can I have some Step notch pics/help?
 

Man you are a car salesman. ;) . 63 is a beautiful car but imho the 62 is the best impala ever. i'm limited on space at the house so i have to be real picky about what i want. HOA doesnt allow "project vehicles in the driveway" i have 2 projects at dads and a friend with a few acres where i can store temporarily but i can only do one project at a time. so i will have to pass unless you want to give it to me. :uhmk:

Re: Can I have some Step notch pics/help?
 

Lol....i try !!! 59 is my favorite