Wait... what's this supposed to look like?
 

I've got an '80 C10.

I just received an order from Brothers that included a pair of front turn signal housings. However, they don't look anything like what looks like should be in the empty holes in the headlight doors. It looks like I need just some rectangular lenses, but what I got in the box was a big plastic housing that is almost the size of the headlights on my 86. What is the front end of an '80 supposed to look like?

Re: Wait... what's this supposed to look like?
 

The signal housings didn't change until 81. In 81-82, the housings were in the front bumper!! In 83, they went behind the center grill. You have 81-82 housings.

http://thumb13.webshots.net/t/58/58/...3WnwZLn_th.jpg

Re: Wait... what's this supposed to look like?
 

Super... Thanks Brothers.
This is what I've got.

http://i42.photobucket.com/albums/e3...s/CIMG6784.jpg

Re: Wait... what's this supposed to look like?
 

I think that is correct for '80 with the rectangular headlamps. The ones you need are the same from '75-80 (with round headlamps). The 73-74 will physically interchange, but are amber lenses.

Re: Wait... what's this supposed to look like?
 

those r for the square headlights

Re: Wait... what's this supposed to look like?
 

Good Afternoon,

You have the wrong lamp for the year of truck you have (in picture).
Lamp is for '80 with square H/L. I attached LMC catalogue page, You need item #4 upper left.
I hope this helps.

God Bless, Terry