GMC 305 V6 Parts including turbo 400 adapter
 

Yanking the GMC 305 V6 out of my '67 C15 due to a bit of a lower end knock. Selling any and all parts from the engine before scrapping it or will sell engine as whole unit.

Turbo 400 Transmission adapter - I have a turbo 400 hooked up to the 305 right now, keeping the transmission but letting the adapter go as I'm going small block chevy that'll bolt right to it

Power Steering Bracket - apparently these are hard to find for these?

Oil Pan, Carb, Anything else anyone needs before I scrap it?

Willing to trade parts for the small block motor mount towers.

***** Skip to my lowest post for prices *****

Re: GMC 305 V6 Parts including turbo 400 adapter
 

Would you happen to have a pic of the front rubber motor mounts? I need some for my 67.
Posted via Mobile Device

Re: GMC 305 V6 Parts including turbo 400 adapter
 

Alas the front motor mounts are gone, I had to replace them with some ford or jeep ones that were kinda similar and rig them in to work. The original ones went and I couldn't find anyone with replacements. At one point I had some Azek exterior trim board in there are a temporary solution :lol:

Re: GMC 305 V6 Parts including turbo 400 adapter
 

interested in Power steering pump brackets and a spin on oil filter adapter? shipped to 72851.
Thanks,
Tim

Re: GMC 305 V6 Parts including turbo 400 adapter
 

Interested in the carb pending pic and price, also I'll get in line for the ps bracket and T400 adapter, again pending price, pics, etc. BTW did it have plaid valve covers?

Thanks.
Scott

Re: GMC 305 V6 Parts including turbo 400 adapter
 

pm sent

Re: GMC 305 V6 Parts including turbo 400 adapter
 

I. All for sale or trade ads must include the price. If you do not know the price of the item(s) you are selling, then you should do some research. Absolutely no auctions or bids.

Dccarpenter please post a price ASAP per board rules. Thank you.

Re: GMC 305 V6 Parts including turbo 400 adapter
 

Sorry for breaking forum rules was unintentional, was trying to see if anyone was even interested in the stuff to weigh versus scrapping the engine. Enclosed is a price list. I am pulling the engine
Sunday the 10th, all parts pre-sold will be shipped the 11th.

*** Sold **** Oil Filter Adapter: $20.00
Carburetor : $40.00
*** Sold **** Power steering bracket: $40.00
Valve Covers (not plaid) : $25.00
Oil Pan: $50.00
Oil Pump: $40.00
Heads (good shape): $79.00
Exhaust Manifolds: $50.00
Distributor/coil: $40.00

Turbo 400 adapter will be for sale, trying to find a rough price on the net somewhere.

Re: GMC 305 V6 Parts including turbo 400 adapter
 

Did I miss the oil filter adapter and power steering bracket?

Re: GMC 305 V6 Parts including turbo 400 adapter
 

still interested in carb pending pics. If u would rather email them please send them to sdelvy55@aol.com

thanks

Re: GMC 305 V6 Parts including turbo 400 adapter
 

I'm guessing the PM post sealed the deal. This is the unfortunate result of posts without prices and a proper order of parts requests. Sharpie

Re: GMC 305 V6 Parts including turbo 400 adapter
 

Interested in 400 adapter pending price, please put me in line. Thanks.
Posted via Mobile Device

Re: GMC 305 V6 Parts including turbo 400 adapter
 

I did not purchase either of these, oil filter adapter or power steering brackets.

Re: GMC 305 V6 Parts including turbo 400 adapter
 

Just a guess, it's a shame the member in line for them missed out. Sharpie

Re: GMC 305 V6 Parts including turbo 400 adapter
 

ScottH - Will send carb pic when I pull engine, truck is at a friends right now. It is yours if you want it.

Oil filter adapter and power steering adapter traded to gentleman giving me leaf springs. If he opts out I will let go in order of request for them in thread.

Trans adapter in flux till I figure out what kind it is and if I have all the parts it is supposed to have.

Re: GMC 305 V6 Parts including turbo 400 adapter
 

i know this is an old post but is the carb still available? i am interested

Re: GMC 305 V6 Parts including turbo 400 adapter
 

still waiting on carb pics.

Re: GMC 305 V6 Parts including turbo 400 adapter
 

Scott
Ray is planning on doing the engine swap this weekend so he should have pics for you then.

Re: GMC 305 V6 Parts including turbo 400 adapter
 

Thanks for the heads up.

Re: GMC 305 V6 Parts including turbo 400 adapter
 

Scott,

Here are the carburetor pictures. Let me know if you are still interested and I can get it shipped out for you any day this week.

Re: GMC 305 V6 Parts including turbo 400 adapter
 

carb looks like it will work, please pm me total (shipping is to 08753) and payment info.

thanks very much

Scott

Re: GMC 305 V6 Parts including turbo 400 adapter
 

If u still have the th400 adapter pls send me a price and your location. My email is bigboycustomz@yahoo.com , thank you.
Posted via Mobile Device

Re: GMC 305 V6 Parts including turbo 400 adapter
 

FYI,

Engine is pulled and carb is to Scott, traded a few parts per my previous post.

Not sure when I'll have a chance to get into the rest of the parts remaining on the engine, had to put it in storage where I won't be able to work on it until I can free up some space at the shop. Will post pics of all parts once I get them cleaned and in any condition to sell plus figure out the shipping end of things, it won't be this week or next because I can't work at pulling from the engine at the moment.

Re: GMC 305 V6 Parts including turbo 400 adapter
 

Ok, thanks, just shoot me an email or something when u get the auto tranny adapter available unless its already promised. Thanks again. Wil.
Posted via Mobile Device

Re: GMC 305 V6 Parts including turbo 400 adapter
 

Do you still happen to have the transmission adapter available?