Longer wheel studs?
 

Anyone know where I can find longer wheel studs for the rear on my 69?

.472"knurl 7/16"-20


Stock length is 1.5" I need 2"

Re: Longer wheel studs?
 

napa
Go in with your info and they should be able to get them if they don't have them on hand

Re: Longer wheel studs?
 

much better to take an old one with you the important part is to make sure the splined part is the same size

local autoparts store are a great source for common autorarts i prefer NAPA and CARQUEST as they normally have more knowelageble better trained(some even know how to read thru parts books) counter people

from what i see most 7/16 are .480

Re: Longer wheel studs?
 

If I remember correctly, and there is always the possibility that I do not, I couldn't find longer stock 7/16" studs with that knurl a couple of years ago. I had put some 1/4" spacers on to bring the wheels out a little and wanted longer studs as I had only about 5-6 turns of the lug nuts. Never found them and removed the spacers.

Re: Longer wheel studs?
 

most parts stores around my area carry dorman studs. try this part # 610-157 the catalog says they are 3/8" to 1/2" LONGER

Re: Longer wheel studs?
 

Thanks for the leads guys.
From what I have found, there is not a longer version in .472. Some guys on camaro sites said they used the .480 studs with little problems installing.
The 610-187 appear to be .487
it's either longer studs or swap to 1" adapters.
Posted via Mobile Device

Re: Longer wheel studs?
 

7 years old, but in case anyone is looking.

Moser makes a 7/16-20 .480 knurl. Part #8050

10x for $30 on amazon prime.

Re: Longer wheel studs?
 

Just did mine last week on 70 gmc 1/2t. They are Dorman 610-186-1. About the same price at amazon or $2.50 each at autozone. They are approx 1/4” longer than the factory ones. ;)