81 1 ton 4x4 for parts
 

For parts 81 Chevy truck single cab 454, ac, dana 44 front with old school lock outs, 14 bolt rear 205 4 speed,
Deep 16.5 rear wheels, look to be 10" wide 16.5's $50 each
Let me know if you need anything, & I'll price it
Interior is not too good
also for parts locally
Thanks,
Tom

Re: 81 1 ton 4x4 for parts
 

I need the two center division bars and latch on the back window?
If they are there and you want to sell let me know how much shipped to 89048 NV

Thanks,
Corsair

Re: 81 1 ton 4x4 for parts
 

Tach dash?

Re: 81 1 ton 4x4 for parts
 

corsair, the bars are there, the latch is not

too much stuff No tach dash

Re: 81 1 ton 4x4 for parts
 

How much for the driver side window rear track shipped to 41051?

Re: 81 1 ton 4x4 for parts
 

geod919 $22 shipped

Re: 81 1 ton 4x4 for parts
 

paypal?

Re: 81 1 ton 4x4 for parts
 

Hello,

How far apart are you taking this? I've been searching for good rear spring hangers (rearmost) and possibly the reinforcements for the rear leaf front hangers. Spring crossmember? All of this os of course specific to a K30 frame. Not sure if it'd be worthwhile for either of us by the time you cut them off, but figured I'd check :).

Thanks,

Joe

P.S. - Shipping would be to 17740...

Re: 81 1 ton 4x4 for parts
 

K30dump, getting those parts not out of the question, i was hoping to sell the frame whole to someone, if that doesn't happen & I wind up taking it to scrap I would cut those brackets off, if you have time give it a couple weeks to see what happens.
Thanks,
Tom

Re: 81 1 ton 4x4 for parts
 

if corsair don't want the bars i will take them

we taking about the rear sliding window bars right =)

Re: 81 1 ton 4x4 for parts
 

If this happens, I would be interested in the uppermost leaf in the rear spring packs, provided they are the 2.5 inch and not the 3inch wide springs.

Re: 81 1 ton 4x4 for parts
 

How much for the bars shipped to 89048

Thanks,
Fred

Re: 81 1 ton 4x4 for parts
 

Corsair Hows $20 shipped sound
Won't be able to ship till monday

babyJay, I'll keep you in mind

Re: 81 1 ton 4x4 for parts
 

I will take them send me a PM with your paypal and I will get it done

Thanks,
CORSAIR

Re: 81 1 ton 4x4 for parts
 

Tom,

By all means, if you can sell it whole and avoid cutting a good K30 frame, I don't blame you a bit :). Let me know though, not a huge rush. Mine are there but rusted :(...

Thanks,

Joe
Posted via Mobile Device

Re: 81 1 ton 4x4 for parts
 

I asume that the battery in the engine compartment pic is on a battery tray, if so how badly rusted is it and how much to N9G2A7 Canada ?

Re: 81 1 ton 4x4 for parts
 

Hey Tom can you post a pic of the front axle.81 had either a corp 10B or D60.The only way it has a D44 is if some one swapped it out.

Re: 81 1 ton 4x4 for parts
 

You should get a picture of that front axle. It's either a Dana60,which an '81 K/30 would have,or it's an older Dana44 swapped-in. It has the large diameter hubs.

Re: 81 1 ton 4x4 for parts
 

It has been swapped out for a dana 44

Re: 81 1 ton 4x4 for parts
 

Tom,
I havent heard from you regarding the window parts? let me know how you want to proceed?

Thanks,
Fred

Re: 81 1 ton 4x4 for parts
 

It did look that way. Are those Selectro hubs?

Re: 81 1 ton 4x4 for parts
 

special-K Yep selectro hubs

corsair, your pieces are off & will ship tuesday

ssdelux, I'll check that battery tray out.

I have a D60 kingpin front & matching 14 bolt rear, I'd have to get $1200 for the pair, they are in an 89 1 ton service truck, single rear axle.
Its a running driving fuel injected 350, turbo 400, & 205.
Tom

Re: 81 1 ton 4x4 for parts
 

Would you separate the np205 to sell ?

Re: 81 1 ton 4x4 for parts
 

What condition is the drivers side fuel tank filler neck ?

Travis

Re: 81 1 ton 4x4 for parts
 

Tom,

Any word on the frame? Still looking for rear spring hangers, possibly crossmember...

Let me know, thanks!!

Joe