The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)

- - Rear end width (https://67-72chevytrucks.com/vboard/showthread.php?t=458916)

ont_guy_38

04-12-2011 11:59 PM

Rear end width

Can anybody tell me the exact width of our rear ends from wheel mounting surfaces....found a 9" that's 65 wide at the wheel mounting surface...if I could find a rear that's an inch shorter that would be awesome but cant be wider at all

b454rat

04-13-2011 07:20 AM

Re: Rear end width

I don't have a 2wd anymore, but 65" sounds close if a little narrower...

BigBlocksRule

04-13-2011 07:48 AM

Re: Rear end width

62.5" sticks in my memory for some reason...I looked into doing this with an '85 shortwide and most of the 9" rearends were too wide.

All times are GMT -4. The time now is 06:33 AM.