LMC bed cargo lamp
 

Has anyone bought one of these. If so I have a how to question. When you put the new rubber things in that have a small amount of metal threads in them, and then when you tighten them the rubber bulges on the inside of the wall of the cab making the light tighten down. So my rubber plug looking things are not doing what they are made to. They are pulling though and not tightening. HELP. SUGGESTIONS

Re: LMC bed cargo lamp
 

Ace hardware carries them in different sizes. Maybe get the next size up?

Re: LMC bed cargo lamp
 

are they push'n in all the way down and are the thread's at the bottom ? I replaced mine with the LMC version with no issue's . the rubber bush'n should be stiff to push in but must be far enough for the rubber to swell inside befor it try's to push out.

Re: LMC bed cargo lamp
 

Yes you are describing them and what i have accuratly but mine are not tight enough, they are swelling on the outside and pulling through. Ill check ACE today thanks.

Re: LMC bed cargo lamp
 

Odd i got mine from LMC about a month ago and it went pretty good, lip on the outside then inserted the lil screw and tighten...

Re: LMC bed cargo lamp
 

Yes that is what I did also. Thinking one, two, three and done! But it kept pulling through and bulging on the outside of the can wall. So i went to ACE Hardware and got the exact same size rubber lock nut washer thingies but just about twice as long and came home and they tightened right up!

Re: LMC bed cargo lamp
 

they very could have package'd your with some insert's that were simply to short. glad to hear you got it work'd out though.