Best intake for sbc
 

What would the best way to go with a intake for a 350 or 355 sbc with a little cam in it being ran on the street on pump gas?

Re: Best intake for sbc
 

An Eldebrock performer airgap eps, will give you tons of torque perfect for street.

Re: Best intake for sbc
 

IMO,
The Brodix HV1016 is one of the best street strip intakes. It has great low speed characteristics and still makes power in the high rpm range.

http://www.summitracing.com/parts/BRO-HV1016/?rtype=10

Re: Best intake for sbc
 

I would recommend this intake as well.

Re: Best intake for sbc
 

+1

those are great all around intakes

Re: Best intake for sbc
 

get a blower

Re: Best intake for sbc
 

Performer rpm air gap.

Re: Best intake for sbc
 

x2

Re: Best intake for sbc
 

Single plane Weiand 7546, thats what I'm running on mine, granted I'm running headers, 292 Comp Cam, and a 600 double pumper. Its my daily driver too.

Re: Best intake for sbc
 

I run an Edelbrock Performer RPM manifold on my "hot rodded" 350, very pleased.

That being said, the manifold you pick should be based on the rest of the engines ability to breathe and what RPM it builds power in. If you don't have better than stock heads and an exhaust system that utilizes either headers or 2-1/2" ram horn manifolds the new intake won't see it's full potential.

Hope that helps.

John

Re: Best intake for sbc
 

haha agreed

Re: Best intake for sbc
 

the edelbrock RPM's (all variations) are very good intakes for mild street motors. that brodix works equally as well. dual-plane intakes have come a long way in the last 5-10yrs