The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1991 Blazers, Jimmys, and Suburbans Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=37)
-   -   88 Burb Tailgate window stuck down (https://67-72chevytrucks.com/vboard/showthread.php?t=463216)

kw 05-07-2011 02:08 PM

88 Burb Tailgate window stuck down
 
The rr window of my '88 burb has been acting spotty, and today it went down and quit working after that. Took the tailgate inside covers off but can't find a way to get the window up so I can get to the mechanism to troubleshoot it.

When I turn the key in the tailgate, I can hear a small click coming from the motor.

Any ideas on how to get the window up?

Thanks,

Kurt

kw 05-07-2011 08:27 PM

Re: 88 Burb Tailgate window stuck down
 
It's fixed. There's an interlock switch on the pass. side. Pushed it in with a screwdriver while turning the key and things started to work. Adjusted the latch mechanism and was at least able to get the vehicle weathertight for now.

special-K 05-09-2011 06:30 AM

Re: 88 Burb Tailgate window stuck down
 
Good! I was just going to suggest that before tossing a regulator at it. How is the channel? The material gets rotted and the steel rusts. Did it get stuck mostly at about 3/4 closed going up? That's where the glass has to shift forward to go with slant of the back.

kw 05-09-2011 07:12 AM

Re: 88 Burb Tailgate window stuck down
 
The tracks look OK. Compared to the rest of the truck, what with sheets of paint peeling and blowing down the street.

The window has never had any problems going up and down, but recently it just wouldn't go up unless I hit a major bump in the road. Saturday it just wouldn't go up at all.

I suppose since it's still all apart and the window is up it's a good time to do some general maintenance and lubrication.

Thanks!

Kurt

keithh999 05-13-2011 08:44 PM

Re: 88 Burb Tailgate window stuck down
 
i have the same style burb and my window channels and rubbers are shot or gone and if i run with the window down it jams and wont go back up without unbolting the regulator and motor with a special wrench i made .....one of these days ill have the money to actually do the things i want to do to this burb.


All times are GMT -4. The time now is 06:00 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com