Anyone else have this problem with their window weateherstriping?
 

I got new window weatherstriping from LMC and installed it the proper way (I think), with the window all the way up there's still a small gap between the window and the weather striping. The gap is the same on both the drives and passengers side. Anyone else have this problem? the PO had already removed the old weatherstriping so I can't tell if the new went in the same way as the old.

http://i76.photobucket.com/albums/j3...k/100_2216.jpg

Re: Anyone else have this problem with their window weateherstriping?
 

Is the window up tight in the front? The tracks may be mis aligned.
Jimmy

Re: Anyone else have this problem with their window weateherstriping?
 

If I had to guess, I would say the fuzzie pieces in the door are keeping your window from going all the way to the top. Mine do the same thing... You may not like my solution, but what I do is pry them away from the window little while rolling them up.

Re: Anyone else have this problem with their window weateherstriping?
 

X2...Sux!

Re: Anyone else have this problem with their window weateherstriping?
 

:agree:

I experienced the same problem last night. My window went up a little more than yous did, but the window track was hitting the outer belt weatherstrip (fuzzy). Once I pulled out a little it rolled right up. I figured it was my repop doors. I think it will work itself in because it was barely hitting. It was just enough to catch.

I operated the window after each piece I installed to make sure it would work fine.

The one thing I don't like the most is the window track is slightly visible once it is rolled up. Most people will not notice it. ;)

Re: Anyone else have this problem with their window weateherstriping?
 

^^^^ Your truck looks bad a$$ anymore pics not trying to thread jack sorry about your window problem maybe talk to a tint shop or window shop sometimes in the past with another type of vehicle I had which shall remain nameless the windows would get a little tacky from use and a good cleaning would help them slide better perhaps there's a product the 2 entities I mentioned would know of that also acts to lubricate the affair. Good luck.

Re: Anyone else have this problem with their window weateherstriping?
 

If your asking about mine the link to the complete story is in my sig "Project Vitamin C-10". If your not asking about mine......opps. ;)

Re: Anyone else have this problem with their window weateherstriping?
 

Was asking about yours will check it out thanks and to OP please excuse my interuption but free bump for your thread.:metal:

Re: Anyone else have this problem with their window weateherstriping?
 

Mine does the same thing w/ the re-pop window seals. I think I'm going to just have new window glass cut 1/2" longer. I figure the re-pops are probably going to be around in the same format for the near future, and my door glass is pretty beat up anyways.

Re: Anyone else have this problem with their window weateherstriping?
 

yes when i installed the new fuzzies i had the same problem in my stock doors,the originals are much thinner so i am going to see if i can lightly take a small grinder to them and see if that works.good luck!