Console cover
 

Does anyone make a cover for the fold down console out of a '03? It doesn't make sense to build one like this so when I tip it up eveything falls out? What were they thinking? Thanks for any ideas or help!

Mike

Re: Console cover
 

Good point. I've never seen one. Anyone?

Re: Console cover
 

Ok How about any idea on how to make one? Or which console does have one.

Re: Console cover
 

Don't know what that flip down console is out of, but the one in my 03 GMC doesn't look anything like that. It has a cover on it, and my drink holders are down on the front part of the seat by the floor.

Re: Console cover
 

I think they were different depending on trim levels.

Re: Console cover
 

my gmc has one like johnc. so did my tahoe. it would be a pretty easy swap if you found one.

Re: Console cover
 

I had one out of a 1999 originally and the hinge broke which I found was very common. I found this one on ebay. Could you post a picture of your cover?

Thanks
Mike

Re: Console cover
 

heres what mine looks like
http://i796.photobucket.com/albums/y...g?t=1306186249

Re: Console cover
 

That's what mine looks like too! I've never seen the other one....I wouldn't mind an extra set of cup holders, and the little recess mine has doesn't hold much just kind of slides around and off....

Nick

Re: Console cover
 

Thanks

I think I will just make a wood cover with a friction latch, maybe that will hold. I put these seats in my '69 so I could have the shoulder harness and a middle seat belt. The 99 seat had a lift up latch but no cup holder, I have pictures of it here:

http://67-72chevytrucks.com/vboard/s...ighlight=seats

I just thought somebody might have a cover all made up.

Re: Console cover
 

Does the cover open up ?

Thanks

Re: Console cover
 

yup

Re: Console cover
 

That picture is a console from a 07 up new body style truck/suv. Not sure if the upper half from a 99-07 classic would bolt up or not.

Re: Console cover
 

Which picture? The first one or the last one?

Re: Console cover
 

I have the first one in my truck now, post #1

Re: Console cover
 

The first pic in the first post is the new body 07 up style


Second pic is like the console in my 06 (99-07 classic)

Re: Console cover
 

Is the center seat/ console from a 07+ (NBS) a direct replacement for the center seat/console for the 2006? I would like to replace the fixed center seat in my work truck with the folding center seat from an 07+ so I have the ability to store things in the under seat safe offered in the new body style.

Re: Console cover
 

I used the same holes I drilled for the 99 console for the 07 console.