63-87 rack and pinion
 

Next week (may 23-27) we will be posting up install picts of our new rack and pinion kit as it goes in. StreetTrucks will also be covering the install for an upcoming article. We are having the owner of the truck do the install himself, with an "out of the box" kit. These kits will go onsale starting June 1. Stay tuned for updates. Thanks.

Re: 63-87 rack and pinion
 

Awesome, I have also been waiting for some more info on your rear shock mounts and the long track bar you are showing on the JT project. I currently have adjustable shocks so I would be interested in a package deal without the shocks so I can use my QA1 shocks.
Thanks
David

Re: 63-87 rack and pinion
 

on the way soon

Re: 63-87 rack and pinion
 

Sounds good Rob,

I am to far along to use you kit but it is nice to see all the testing and R & D that is going into the new Rack & pinion kit before it is released.
:metal:

Re: 63-87 rack and pinion
 

Tempting......:D.

Re: 63-87 rack and pinion
 

Impatiently waiting

Re: 63-87 rack and pinion
 

:wop:

:lol: someone had to do it. Can't wait to see the pics posted up.

Re: 63-87 rack and pinion
 

Looking forward to some pics
Posted via Mobile Device

Re: 63-87 rack and pinion
 

Did this happen? Or...

Re: 63-87 rack and pinion
 

Rob,

Will your rack & pinion setup work on a crossmember that has been section 1.5''

thanks

Re: 63-87 rack and pinion
 

Sorry, sorry, sorry, But, we wil post uo wed. I tried today, but our internet was down at the shop. pump and pulleys are on. First step done.

Re: 63-87 rack and pinion
 

Subscribed

Re: 63-87 rack and pinion
 

:smoke:

Re: 63-87 rack and pinion
 

:sumo:

Re: 63-87 rack and pinion
 

Thought these were going to be ready for June 1st
Posted via Mobile Device

Re: 63-87 rack and pinion
 

where y'all at on this Rob?
Do we have pricing and availability yet?

Re: 63-87 rack and pinion
 

Jake (owner) installing the new p/s pump with a set of Bill's brackets.

Re: 63-87 rack and pinion
 

p/s pump and pulley

Re: 63-87 rack and pinion
 

Removing the outer tierod ends

Re: 63-87 rack and pinion
 

Removing the stock steering box

Re: 63-87 rack and pinion
 

Pulling out all of the stock steering

Re: 63-87 rack and pinion
 

The stock steering shaft goes too.

Re: 63-87 rack and pinion
 

Here is a shot of the main rack mounting brackets

Re: 63-87 rack and pinion
 

The two lower 'fingers' set the height of the brackets. The first locating hole is dead center on the crossmember.

Re: 63-87 rack and pinion
 

The production rack mount.