The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967 - 1972 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=3)
-   -   Help keep me motivated!!! (https://67-72chevytrucks.com/vboard/showthread.php?t=465752)

weircc 05-22-2011 02:56 PM
Help keep me motivated!!!
 
So after 5 years of building my truck almost everything done but interior i find myself having to pull the engine to change out the POS comp (THUMPR) cam for something that will allow my truck to run right! what sucks is i have it all ready to drive and cant, and now when i go to the garage all i can do is cringe!!

mbgmike 05-22-2011 03:47 PM
Re: Help keep me motivated!!!
 
Quote:
Originally Posted by weircc (Post 4693904)
So after 5 years of building my truck almost everything done but interior i find myself having to pull the engine to change out the POS comp (THUMPR) cam for something that will allow my truck to run right! what sucks is i have it all ready to drive and cant, and now when i go to the garage all i can do is cringe!!
Sorry to hear that. what wrong with the cam?

eightbanger 05-22-2011 04:03 PM
Re: Help keep me motivated!!!
 
I took my Truck off the road for at worst 2/3 weeks for some needy repairs...3 mths later it's still on jack stands no tranny & half the engine stripped to pull the cam, and it is killing me not to be able to drive it, I can't imagine what on earth 5 yrs would be like....wait I'm supposed to be cheering you up here:lol:
From your avatar she looks like a beautiful Truck, just think how lucky you are to be this close to the Finnish, admittedly you did not want to be moving backwards at this point, but it's only one of those PITA POS CS MF things that are sent to try us all, and remember your not all the way back at the beginning like a lot of us.:waah:
I hope that was inspirational....;)

GASoline71 05-22-2011 04:24 PM
Re: Help keep me motivated!!!
 
Howz this for motivation.


My '72 GMC has a Lunati Bracketmaster II 292 in it... it lopes because it's supposed to. Not just to sound like it.

Gary

FRENCHBLUE72 05-22-2011 04:29 PM
Re: Help keep me motivated!!!
 
Mines been off the road for about 10 years seems life just gets in the way sometimes... Your truck is pretty b!tchen looking.... Summer time is here and your gonna wanna drive it so do some little things and then tackle the engine...

70cst 05-22-2011 04:31 PM
Re: Help keep me motivated!!!
 
weircc ... not sure what to tell you. I purchased the Circuit Rider in 2000 and started to save $$$ so I could have it worked on so some day it would be drivable. In 2008 I found a body shop that started a frame off and now I am (actually fine69) in the final stages of mechanically fine tuning the Circuit Rider. I think by reading about others who were going through similar situations kept me going. With being mechanically challenged and now holding down two jobs I wasn't going to do it myself. Oh I can do the basics but welding, painting, and major wrenching is beyond my skills. Sometimes it’s ok to stand back and take a deep breath and getting recharged. Just take one step at a time. :metal: :ito:

weircc 05-22-2011 07:40 PM
Re: Help keep me motivated!!!
 
Quote:
Originally Posted by mbgmike (Post 4693963)
Sorry to hear that. what wrong with the cam?
well im not sure exactly, for the life of me i can not tune this motor in i have been on every forum asking questions and reading ppls complaints about these cams so instead of wasting another weekend (4 already) trying to try another solution im done with it i mean dont get me wrong im no expert in tuning engines but cant say i have ever had this much problems im sure someone would be able to knock it out but im not the fella lol.

i will somehow fight past this its just gonna be a couple weeks i just really need to blow off some steam and vent thanks for the replies fellas

1970 CST Short Wide 05-22-2011 08:04 PM
Re: Help keep me motivated!!!
 
Comp did the same thing to me. Take that lump stick and send it back to Red at comp and tell him to put it where the sun dont shine. Then go to Lanuti and buy a cam you like, you wont be disapointed. Just put it in your head to get it done and go do it, you will be glad you did

weircc 05-22-2011 10:25 PM
Re: Help keep me motivated!!!
 
already talked to steve at lunati and this is cam im gonna go with i think, the spec sheet is right not info at top

http://www.lunatipower.com/Product.aspx?id=2102

DANTIP 05-23-2011 06:54 AM
Re: Help keep me motivated!!!
 
Let us know how you like the Lunati set up.

70cst 05-23-2011 08:38 AM
Re: Help keep me motivated!!!
 
Quote:
Originally Posted by dantip (Post 4695231)
let us know how you like the lunati set up.
x2

bobs409 05-23-2011 10:03 AM
Re: Help keep me motivated!!!
 
Quote:
Originally Posted by 1970 CST Short Wide (Post 4694319)
Take that lump stick and send it back to Red at comp and tell him to put it where the sun dont shine.
:lol: :lol: :lol:

Now that I've had my laugh, I sure hope I don't have trouble too. I have a 454 just waiting for my 69 Stepside that I put a thumpr cam in. :whine:

1970 CST Short Wide 05-23-2011 10:19 AM
Re: Help keep me motivated!!!
 
Quote:
Originally Posted by bobs409 (Post 4695446)
:lol: :lol: :lol:

Now that I've had my laugh, I sure hope I don't have trouble too. I have a 454 just waiting for my 69 Stepside that I put a thumpr cam in. :whine:
Just be sure to use a good oil with Zinc in it or you will wipe out lobes.


All times are GMT -4. The time now is 05:16 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com