The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   GA 67/68 grills & hood- 69-72 driver fender (https://67-72chevytrucks.com/vboard/showthread.php?t=468089)

badboy007 06-05-2011 06:14 PM

67/68 grills & hood- 69-72 driver fender
 
4 Attachment(s)
Just getting rid of a few extra parts: Prices Reduced
[B]A 67-68 grill. (pickup only). The white one is $50 (pickup only)

67-68 hood has been blasted and sprayed with etching primer. It has some "swiss cheese" holes along the front edge and can be seen in the pics. I think that I have all of the "Chevrolet" letters, but I'll have to find them. It also has two dings in the centerline of the hood. Good driver condition. FREE (pickup only)

Driver side inner fender. No rust through but not perfect. FREE. (pickup only)

69-72 driver side fender. I bought from fellow board member. Has had some bondo work. Doesnt have any rust through. $40 (pickup only) SOLD to Flashed
The first one to say "I'll take it" in the thread and pay will get these.

chuckmc8 06-05-2011 08:10 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
I'm interested in the green grille, other than the pin holes,is it GC otherwise? Dents? Thanks!

badboy007 06-05-2011 11:56 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
Chuckmc8- It has one that is almost unnoticeable. I didnt remember any so I just went to the garage to check. If you decide that you want it, I can bring it to the downtown area any day this week

badboy007 06-09-2011 08:07 AM

Re: 67/68 grills & hood- 69-72 driver fender
 
ttt

badboy007 07-02-2011 06:36 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
ttt

zicc1835 07-02-2011 11:40 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
I will take the hood with letters if r u willing to ship grey hound
Posted via Mobile Device

badboy007 07-03-2011 02:42 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
Zicc1835- That would be fine although I've never shipped via Greyhound before. I leave for vacation tomorrow, would it be ok to get the quotes and ship on 07/11? Did you read the description about the holes and dents?

RagingAsian 07-03-2011 07:27 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
Wish you were shipping the white grille.

flashed 07-03-2011 10:15 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
I will take the fender if I can pick it up when you return from vacation as I am local to you. Just let me know when to come get it .

badboy007 07-04-2011 11:38 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
RagingAsian- I can ship it since no one local is interested. Will need your zip to get a quote

Flashed- its yours. Will be back on Sunday

zicc1835 07-04-2011 11:46 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
i did look at the pics lets se what shipping greyhound is 07102 no one else takes it local i am in no hurry 7/11 is cool

badboy007 07-09-2011 10:10 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
ttt

creepdogg 07-09-2011 11:01 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
Do either of the grilles have the paintable inserts ? I need one for my grilles. If so willing to part the grille out?
Posted via Mobile Device

Leroy-B1 07-09-2011 11:59 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
Interested. In white grille where in georgia. Are. You?
Posted via Mobile Device

badboy007 07-10-2011 11:36 AM

Re: 67/68 grills & hood- 69-72 driver fender
 
creepdog- Dont have any of the inserts

Leroy-B1- I'm in Canton, GA. Off I-75 about 30 miles north of Atlanta

flashed 07-10-2011 03:13 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
Badboy007 ,it was great meeting you today when I picked up the fender .
Thanks again
John

low69chevy 07-10-2011 04:56 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
If willing to ship I'll be interested in the green grill if not the white one zip is 77651 thanks
Posted via Mobile Device

creepdogg 07-10-2011 05:21 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
Quote:

Originally Posted by badboy007 (Post 4782047)
creepdog- Dont have any of the inserts

Leroy-B1- I'm in Canton, GA. Off I-75 about 30 miles north of Atlanta

Thanks. Does anyone know where I can get one of these inserts? Does any companies reproduce them ?

badboy007 07-15-2011 08:51 AM

Re: 67/68 grills & hood- 69-72 driver fender
 
ttt

badboy007 10-03-2011 09:44 AM

Re: 67/68 grills & hood- 69-72 driver fender
 
ttt

badboy007 10-07-2011 08:48 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
TTT. Prices reduced!!.

1967wannabe 10-10-2011 06:45 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
Either of the grilles available?

badboy007 10-11-2011 09:49 AM

Re: 67/68 grills & hood- 69-72 driver fender
 
Still have the white one

bone85k5 01-13-2012 10:45 AM

Re: 67/68 grills & hood- 69-72 driver fender
 
If hood is still available, I will take it...im local just a hour south of ATL

flashed 01-13-2012 01:24 PM

Re: 67/68 grills & hood- 69-72 driver fender
 
If the inner fender is still available I'll come get it out of your way.


All times are GMT -4. The time now is 11:07 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com