Random Photo's
 

Bah

:o

:bowtie:

Good thread indeed!!
Here you go;
My favorite toy.

Something I built.

Something else I made,
Cut up a 30 gallon propane tank and put a 45,000 BTU burner in it.

Nice truck welder, torch, and grill! :D

Thanks Much!!
The grill will cook a Ribeye in 5 minutes flat!!

Can I come play in your yard.........lots of goodies................

:confused: Nice launch chair? :p
Nice toys.

G what are you talking about :)
Do you mean lawn chair?

Any time!!!!!!!!!!!
This is only 1/10th of the goodies in my yard that I built.
Waay to much time and waay to much steel on my hands!!!!:D

This guy has been trying to start this Ford for years.
It still won't run..............

My non-truck with the Smokey Yunick 358.....
400 hp and 400 watts from the Blauplunkt.
Way tooooo much fun.

Since the lawn chair was out next to the truck I though he was considering puttin in. Now that sure would make you feel pretty launched when you put the pedal to the floor. :D

Good one Chemist!!!!!!
Haven't you heard of that new super glue Nasa uses???
It is rated to hold that chair to the floor up to 400hp. LOLOLOL
:D :p :D

I had a friend who had crates in his truck for awhile. Talk about sliding around. hahahhaa
We used the seatbelts to hold the crate still.
It was ghetto to the fullest!

Phoenix,
Mine does that now.
Talk about sliding........spray some silicone anywhere near the truck, It really makes it slide then.
Bedliners are nice but they will beat up your tail gate from all the sliding stuff.

Drop
 

can you snap some pics of your truck broadsude on level ground?

Re: Drop
 

Me? If you're talking to me..gimme about a week for that one :D

TIMSPEED
 

Cool I'm thinking of getting the same setup so it would be nice to see it.

Re: TIMSPEED
 

:D Right on..and with the same setup as me, if you ever wanna go lower, it's faily easy (just install a bolt-in C-Notch when you flip the rear). If I wanted 5/7 (aside from needing a shorter tire) all I would need to do is get a 2" drop spring/control arm, 2" drop shackle...piece of cake.
If it ever stops freaking raining around here, I'll get this thing done! I figured out I'm just gonna put the new brake rotors and drop spindles on myself, then take it down to get the bushings all done. (May have to wait on the bushings, cuz of other things that have came up...)

This is the best thread and I just wanted to bring it up so here goes,
My new combustion chambers,

Another cute one,

Ok now show us the Airstream :D
We have a 59 Caravanner I'm restoring.
I also hang here www.airstreamforums.com