The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1967-1972 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=8)
-   -   CA WTB - Square door panel mamma jamma nuts (https://67-72chevytrucks.com/vboard/showthread.php?t=470279)

Fesser 06-17-2011 11:14 PM

WTB - Square door panel mamma jamma nuts
 
I need about 5 of the little square nut thingies that are pressed (or maybe spot welded) into the doors of our trucks. They are spaced low on the door and the machine screws for the metal door panels (bottom edge) go into them. Several of mine had the screws cut off due to rust and I haven't been really successful geting the remaining part to unthread. I can probably make some but have lots of other things to mess up first. Frank

Fesser 06-18-2011 10:00 AM

Re: WTB - Square door panel mamma jamma nuts
 
Coffee bump

sharpie1972 06-18-2011 10:09 AM

Re: WTB - Square door panel mamma jamma nuts
 
Hi Frank, I can send you these. PM your address. Thanks, Sharpie

Fesser 06-18-2011 10:15 AM

Re: WTB - Square door panel mamma jamma nuts
 
Thanks Dennis. I should have known you'd come through. Frank

67chevy1series 06-18-2011 10:25 AM

Re: WTB - Square door panel mamma jamma nuts
 
sharpie always does!


All times are GMT -4. The time now is 08:09 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 1997-2025 67-72chevytrucks.com