Chevy 383 Stroker Build Videos
 

The Chevy 383 Stroker uses a 350 block and a slightly altered Chevrolet 400 crank. A stock 350 has a piston stroke length of 3.48 inches. The 400 crank changes the 383 to a total stroke of 3.75 inches. This produces a total displacement of 383 cubic inches (thus the name 383). This displacement means that a Chevy 383 Stroker is capable of drawing in a total of 383 cubic inches of air/fuel mixture into it’s cylinder chambers during one cycle of the 8 pistons.

Re: Chevy 383 Stroker Build Videos
 

Nice thread! Only thing I'll add is they were a little vague on clearancing of the block. Here's a page we put together showing a little more detail on clearancing for a stroker SBC.
http://small-block-chevy.com/stroker.html

That just addresses the block, I think Craig built another page for clearancig the rods to clear the cam. I'll go on a hunt for that.

Re: Chevy 383 Stroker Build Videos